Can-Am OUTLANDER 6x6 2021 Series Operator's Manual page 45

ITEMS TO BE
INSPECTED
Cargo
Storage
compartment
Chassis and
suspension
Engine air filter
CVT air filter
What to Do Before Starting the Engine (Key ON)
ITEMS TO BE
INSPECTED
Multifunction gauge
Lights
Fuel level
What to Do After the Engine is Started
ITEMS TO BE
INSPECTED
Steering
Shift lever
4WD/6WD selector
________
INSPECTION TO PERFORM
If you transport a cargo, respect the load capacity.
LOADING THE CARGO RACKS
Refer to
Ensure cargo is properly secured to the racks
Check that the cargo bed release handle is locked by pin
If you are pulling a trailer or another equipment:
– Check hitch and trailer ball condition
– Respect the tongue capacity and towing capacity as
indicated on the label affixed to the hitch or refer to
SPECIFICATIONS
– Ensure trailer is properly secured to hitch
Check if rear storage compartment is properly latched
Check underneath vehicle for any debris on chassis or
suspension and clean them properly
Inspect and clean engine air filter
Inspect and clean CVT air filter
INSPECTION TO PERFORM
Check operation of indicator lamps in multifunction gauge
(during first few seconds of key ON)
Check for messages on multifunction gauge
Check operation and cleanliness of headlights and taillight
Check operation of low and high beams
Check operation of brake light
Check the fuel level.
INSPECTION TO PERFORM
Check if steering operates freely by completely turning it
from side to side
Check operation of shift lever (P, R, N, H and L)
Check operation of 4WD/6WD selector
SAFETY INFORMATION
PRE-RIDE INSPECTION
________
✔
✔
✔
43