Can-Am OUTLANDER 6x6 2021 Series Operator's Manual page 104

EQUIPMENT (IF AVAILABLE ON YOUR MODEL)
Tail Gate Extension Installation
1. Open tail gate latches form both
sides.
sfvmi2014-018-006_a
2. Lower tail gate.
sfvmi2014-018-005
3. Place support brackets to tail gate.
3.1 Install support brackets.
3.2 Turn support brackets inward.
3.3 Close tail gate latches.
sfvmo2014-001-015_b
1. RH Support bracket
______________
102
WARNING
Make sure you do not leave hands
between latches and tail gate.
4. Install tail gate extension.
4.1 Align and insert cargo exten-
sion into the vehicle's "LINQ"
opening.
NOTE: Make sure latches are in
the open position.
4.2 Turn latch to the lock position.
sfvmo2014-001-017_b
5. Install tail gate extension.
5.1 Install bracket.
5.2 Place bracket.
5.3 Tighten cargo extender screw
to recommended specifica-
tion.
TIGHTENING TORQUE
Cargo extender
screw
sfvmo2014-001-016_b
8 N•m ± 1 N•m
(71 lbf•in ± 9 lbf•in)