Can-Am OUTLANDER 6x6 2021 Series Operator's Manual page 127

2. Reinstall dipstick, screw in it com-
pletely.
3. Remove and check oil level. It
should be near or equal to the up-
per mark.
3
V07C02Y
TYPICAL
1. Full
2. Add
3. Operating range
To add oil, remove dipstick. Place a
funnel into the dipstick tube to avoid
spillage.
Add a small amount of recommended
oil and recheck oil level.
Repeat the above procedures until
oil level reaches the dipstick's upper
mark. Do not overfill.
Properly tighten dipstick.
Recommended Engine Oil
Rotax ® engines were developed and
validated using the XPS™ oil. BRP rec-
ommends the use of its XPS engine oil
or an equivalent at all time. Damages
caused by the use of an oil not suitable
for the engine may not be covered by
the BRP Limited Warranty.
1
2
use of oil not suitable for this engine
may not be covered by the BRP lim-
ited warranty.
______________
MAINTENANCE PROCEDURES
XPS RECOMMENDED ENGINE OIL
General purpose
Cold temperature
Warm
temperature
IF THE RECOMMENDED XPS
ENGINE OIL IS NOT AVAILABLE
Use a 4-stroke SAE engine oil
meeting or exceeding the following
lubricant industry specifications.
Always check the API service label
certification on the oil container, it must
contain at least one of the indicated
standards.
– API service classification SJ, SL,
SM or SN
NOTICE
Damages caused by the
Scandinavia:
4T 5W40
SYNTHETIC
BLEND
OIL (EUR)
(P/N 779290)
Other Countries:
4T 5W40
SYNTHETIC
BLEND OIL
(P/N 779133)
Scandinavia:
4T 0W40
SYNTHETIC
OIL (EUR)
(P/N 779286)
Other Countries:
4T 0W40
SYNTHETIC OIL
(P/N 779139)
Scandinavia:
4T 10W50
SYNTHETIC
OIL (EUR)
(P/N 779240)
Other Countries:
4T 10W50
SYNTHETIC OIL
(P/N 779234)
125