Burst Synchronization; Related Topics - Agilent Technologies 8960 10 Series Reference Manual

Phase and Frequency Error Measurement Description

Burst Synchronization

The PFER measurement provides the user a choice for the time reference (burst synchronization). see
Synchronization of Measurements" on page 115
Table 4.
Burst Synchronization
Midamble
RF Amplitude
None

Related Topics

*******************************************************
"Programming a Phase and Frequency Error Measurement" on page 85
"Test Adherence to Standards" on page 110
*******************************************************
84
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\meas_pfer_desc.fm
Description
References measurement timing to the midamble
transmitted within a timeslot.
The amplitude rise and fall of a transmitted burst
determines the measurement time reference.
No edge of the burst will be detected, the
measurement will be made using the first 87 or 147
bits of data found centered around the middle of the
expected burst position. For may be used when
measuring non-bursted signals
"Burst