Agilent Technologies 8960 10 Series Reference Manual page 557

Configuring the Test Set's GPIB Address
Configuring the Test Set's GPIB Address
February 14, 2000
Description
The GPIB address is an integer between 0 and 30. The test set comes with a default address of 14 and may be
set/queried using the SYSTem subsystem or manually through the system configuration screen by selecting
the parameter and changing the number with the knob or the keypad.
The GPIB address is a non-volatile parameter. The GPIB address is not affected by any reset operation and
can only be changed by direct access to the parameter itself.
Related Topics
*******************************************************
"SYSTem:COMMunicate:GPIB:[:SELF]:ADDRess" on page 481
*******************************************************
557
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\conf_hpib.fm