SYSTem:PRESet
SYSTem:PRESet3
Function
Performs a partial preset. This is the recommended command for users when a partial preset
is needed during remote operation of the test set.
Any call in process is disconnected and all measurements are aborted and inactivated.
Measurement parameters are not changed.
A partial preset will not modify any measurement settings including trigger arm. See
"Trigger Arm (Single or Continuous) Description" on page
See
Related Topics
Programming Example
OUTPUT 714;"SYSTEM:PRESET3" !Partial preset when in remote operation.
494
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_SYSTem_PRESet.fm
"Partial Preset" on page 535
for more details.
151.