ABORt
ABORt:<meas-mnemonic>
Function
Stops the selected measurement if it is active. See
If the trigger arm is set to single, see
page
If the trigger arm is set to continuous the measurements will re-arm and initiate again.
Setting
Range
• AAUDio
• BERRor
• DAUDio
• DPOWer
• FBERror
• ORFSpectrum
• IQTuning
• PFERror
• PVTime
• TXPower
Programming Example
OUTPUT 714;"ABORT:PVTIME" !Aborts a PvT measurement.
218
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_abort.fm
151the measurements will go to the idle state.
"Measurement States" on page 150
"Trigger Arm (Single or Continuous) Description" on