The LAN subnet mask is a non-volatile parameter. The LAN subnet mask is not affected by any reset
operation and can only be changed by direct access to the parameter itself.
NOTE
If the LAN address is set to a value in a different network class (than the previous value), the
subnet mask will change to the default net mask for the new network class.
The subnet mask number is obtained from your network administrator.
Related Topics
*******************************************************
"SYSTem:COMMunicate:LAN[:SELF]:ADDRess" on page 482
"SYSTem:COMMunicate:LAN[:SELF]:DGATeway" on page 483
"SYSTem:COMMunicate:LAN[:SELF]:SMASk" on page 483
*******************************************************
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\conf_lan.fm
Configuring the Test Set's LAN
561