Agilent Technologies 8960 10 Series Reference Manual page 396

SETup:FBERror
SETup:FBERror:TIMeout[:STIMe]
Function Selects/queries the timeout value in seconds for the trigger state during Fast Bit Error
measurements and sets the timeout state to ON. The units (S|MS) are optional, if no units are
specified than units default to S.
Setting Range: .1 to 999
Resolution: .1
Query Range: .1 to 999
Resolution: .1
*RST 10 seconds
Programming Example
OUTPUT 714;"SETUP:FBERROR:TIMEOUT:STIME 20" !Sets the time out value to
SETup:FBERror:TIMeout:TIME
Function Selects/queries the timeout value in seconds for the trigger state during Fast Bit Error
measurements. The units (S|MS) are optional, if no units are specified than units default to S.
Setting Range: .1 to 999
Resolution: .1
Query Range: .1 to 999
Resolution: .1
*RST 10 seconds
Programming Example
OUTPUT 714;"SETUP:FBERROR:TIMEOUT:TIME 20" !Sets the time out value to
SETup:FBERror:TIMeout:STATe
Function Sets/queries the timeout state for Fast BER measurements.
Setting Range: 0|OFF | 1|ON
Query Range: 0|1
*RST 0|OFF
Programming Example
OUTPUT 714;"SETUP:FBERROR:TIMEOUT:STATE ON" !Sets the timeout state to on.
396
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_setup_fberror.fm
!20 seconds and the state to on.
!20 seconds.