Agilent Technologies 8960 10 Series Reference Manual page 287

CALL:TCHannel[:ARFCn][:SELected]
Function Sets/queries the channel number of downlink and uplink TCH for the band already selected.
Additional commands can be appended to aid in controller/Mobile Station synchronization. See
for examples.
Setting range:
• DCS band, channels 512 to 885
• EGSM band, channels 975 to 1023 and 0 to 124
• PCS band, channels 512 to 810
• PGSM band, channels 1 to 124
resolution: 1
Query range:
• DCS band, channels 512 to 885
• EGSM band, channels 975 to 1023 and 0 to 124
• PCS band, channels 512 to 810
• PGSM band, channels 1 to 124
resolution: 1
*RST setting 30 (PGSM band)
Programming Example
OUTPUT 714;"CALL:TCHANNEL:ARFCN:SELECTED 512" !Selects ARFCN of 512 on the
CALL:TCHannel[:ARFCn]:DCS
Function Sets/queries the channel number for downlink and uplink TCH for DCS band. See
the Traffic Channel (TCH)" on page
TCH ARFCN may be set and queried when the CALL:STATUS:STATE is idle or connected, see
"CALL:STATus[:STATe]?" on page
Additional commands can be appended to aid in controller/Mobile Station synchronization. See
"Call Processing Subsystem Overlapped Command Synchronization Commands" on page 31
examples.
Setting range: 512 to 885 (default: 698)
resolution: 1
Query range: 512 to 885
resolution: 1
*RST setting 30 (PGSM band)
Programming Example
OUTPUT 714;"CALL:TCHANNEL:ARFCN:DCS 512"
!test set.
521.
283.
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_call_tchannel.fm
CALL:TCHannel
"Configuring
for
287