FETCh:PVTime:MASK:LOWer:TIME?
Function
Queries the power versus time measurement's lower limit margin time, worst case result.
The lower limit margin time result is the point in time, relative to bit 0 in the GSM burst, that
corresponds with the worst case measurement (the measurement with the least difference
between measured power and the lower power level boundary specified by the power versus time
mask). See the
Range: −50 µs to 593 µs and 9.91 E+37 (NAN)
Query
Resolution: 1 ns
XXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:PVTime:POWer[:ALL]:MINimum?
Function
Queries the minimum power levels, from a number of multi-measurements, at each user-settable
time offset that is currently turned on. Power levels are relative to the power versus time carrier
power measurement.
The
"SETup:PVTime:TIME[:OFFSet]"
and their time values. The
that are turned on, indicating the number of values to expect when you send this command.
Range: −100 dBc to +10 dBc and 9.91 E+37 (NAN)
Query
Resolution: 0.01 dB
XXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:PVTime:POWer[:ALL][:MAXimum]?
Function
Queries the maximum power levels, from a number of multi-measurements, at each user-settable
time offset that is currently turned on. Power levels are relative to the power versus time carrier
power measurement.
The
"SETup:PVTime:TIME[:OFFSet]"
and their time values. The
that are turned on, indicating the number of values to expect when you send this command.
Range: −100 dBc to +10 dBc and 9.91 E+37 (NAN)
Query
Resolution: 0.01 dB
XXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
"Typical GSM PvT Measurement" on page
command sets up the number of offsets that are turned on
"SETup:PVTime:TIME:POINts?"
command sets up the number of offsets that are turned on
"SETup:PVTime:TIME:POINts?"
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_fetch_pvtime.fm
91.
queries the number of offset points
queries the number of offset points
FETCh:PVTime
343