STATus:OPERation:NMRReady:GSM Condition Register Bit Assignment
The STATus:OPERation:NMRReady:GSM register bits indicate when a GSM measurement has been
completed and new measurement results are available.
Bit
Binary
Number
Weighting
15
32768
14
16384
13
8192
12
4096
11
2048
10
1024
9
512
8
256
7
128
6
64
5
32
Condition
Not Used. Defined by SCPI.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
DPOWer New Measurement
Result Ready
I/Q Tuning New Measurement
Result Ready
BERRor New Measurement
Result Ready
FBERror New Measurement
Result Ready
DAUDio New Measurement
Result Ready
AAUDio New Measurement
Result Ready
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_status_operation.fm
Description
This bit will always be 0.
This bit will always be 0.
This bit will always be 0.
This bit will always be 0.
This bit will always be 0.
This bit will be a 1 if the measurement has been
initiated.
This bit will be a zero at power on, after a preset
and while a measurement is in Measuring States.
See
"Measurement States" on page
This bit will be a 1 if the measurement has been
initiated.
This bit will be a zero at power on, after a preset
and while a measurement is in Measuring States.
See
"Measurement States" on page
This bit will be a 1 if the measurement has been
initiated.
This bit will be a zero at power on, after a preset
and while a measurement is in Measuring States.
See
"Measurement States" on page
This bit will be a 1 if the measurement has been
initiated.
This bit will be a zero at power on, after a preset
and while a measurement is in Measuring States.
See
"Measurement States" on page
This bit will be a 1 if the measurement has been
initiated.
This bit will be a zero at power on, after a preset
and while a measurement is in Measuring States.
See
"Measurement States" on page
This bit will be a 1 if the measurement has been
initiated.
This bit will be a zero at power on, after a preset
and while a measurement is in Measuring States.
See
"Measurement States" on page
STATus:OPERation
150.
150.
150.
150.
150.
150.
451