Agilent Technologies 8960 10 Series Reference Manual page 262

CALL:MS
CALL:MS:REPORTED:TXLEVEL:NEW?;NEW?;NEW?
Function Queries the MS reported transmit level from the SACCH report. Each time the :NEW? query is
sent the test set hangs until report results from that measurement period are sent.
A hanging query that will not return until the MS reports a new SACCH message to test set.
This will return 3 variables the first two must be ignored, the value from the third new query is
valid data.
Query range: 0 to 31 and 9.91E+37
resolution: 1
*RST Setting 9.91E+37 (NAN)
Programming Example
OUTPUT 714;"CALL:MS:REPORTED:TXLEVEL:NEW?;NEW?;NEW?" The third result is valid.
CALL:MS:TADVance
Function Commands the MS what TCH timing advance to use on the uplink.
Additional commands can be appended to aid in controller/Mobile Station synchronization. See
"Call Processing Subsystem Overlapped Commands" on page
Query range: 0 to 63
resolution: 1
*RST Setting zero
Programming Example
OUTPUT 714;"CALL:MS:TADVANCE 3" !Sets the MS TCH Timing Advance to 3 on
CALL:MS:TXLevel[:SELected]
Function Selects the MS uplink power control level for the band already selected. See
Parameters" on page
Additional commands can be appended to aid in controller/Mobile Station synchronization. See
"Call Processing Subsystem Overlapped Commands" on page
Setting range: 0 to 31
resolution: 1
Query range: 0 to 31
resolution: 1
*RST Setting Band: PGSM
TXLevel: 15
Programming Example
OUTPUT 714;"CALL:MS:TXLEVEL:SELECTED 10"
262
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_call_ms.fm
!the uplink.
501.
33.
"Frequency Banded
33.