Table of Contents
Advertisement
►
Protocol:
By selecting the protocol, only packets of this protocol will be captured.
►
Tcpdump:
Enter some options of tcpdump(e.g. -n -s0 -c 100)
►
Result:
This page displays the result of capture packets.
Click Start button to capture the packets which correspond to the configuration requirement.
Click Stop button to stop capturing the packets.
Click "*.pcap" to open or download the capture packets file.
Click "clean" to delete all the packets file.
Click Refresh button to refresh the web page.
3.8.5.3
WAN Speed Test
Test the download speed and upload speed of WAN interface, and show the result on the web page.
Choose the menu System→Diagnostic→WAN Speed Test to load the following page.
The following items are displayed on this screen:
►
Download URL:
Enter the URL to test the download speed of WAN. For example
http://speedtest1.szunicom.com/speedtest/random1000x1000.jpg
►
Upload URL:
Enter the URL to test the upload speed of WAN. For example
http://speedtest1.szunicom.com/speedtest/random2000x2000.jpg
Click the Start button to starting test.
3.8.6
User Management
You can change the factory default user password of the device.
Choose the menu System→User Management to load the following page.
The following items are displayed on this screen:
►
Username:
►
New Password:
►
Confirm Password:
BG9008W User Manual
Figure 3-170 WAN Speed Test
Figure 3-171 User Management
You can select the user with different permissions. However, you can not select
the user whose permission is higher than your permission.
Enter the new password for specified user, not more than 32 characters, and
the space is not supported.
Enter the new password again to confirm for specified user, not more than 32
characters, and the space is not supported.
Page 102 of 133
Advertisement
Table of Contents
