Gaoke BG9008W User Manual page 38

The following items are displayed on this screen:
► IP Stack Version:
WAN Configuration
► Enable WAN:
► Access Mode:
► Link-Local Address:
► Global Unicast Address:
► Default Gateway Address:
► DNS:
► Enable DHCP-PD:
LAN Configuration
► Enable LAN:
► Link-Local Address:
► Global Unicast Address:
► Address Auto Allocate Mode:
BG9008W User Manual
Figure 3-29 Configure IPv6
Choose the IP stack version to use. Provides the following three types:
IPv4,IPv6,IPv4/v6.
If IPv6 or IPv4/v6 is chosen, select this to enable IPv6 stack on WAN.
Select access mode of WAN: IP or PPP.
Select type of Link-Local address: Auto or Manual. If Manual is selected,
you should specify address manually.
Stateless,Manual,DHCPv6. If Manual is selected, you should specify
address manually.
Stateless,Manual. If Manual is selected, you should specify address
manually.
Stateless,Manual,DHCPv6. If Manual is selected, you should specify
DNS manually.
Whether to enable DHCP-PD(prefix delegation) on WAN.
If IPv6 or IPv4/v6 is choseN, select this to enable IPv6 stack on LAN.
Select type of Link-Local address: Auto or Manual. If Manual is selected,
you should specify address manually.
Manual,Auto. If Manual is selected, you should specify address
manually.
SLAAC+RDNSS(Recursive DNS Server)
Page 27 of 133