Gaoke BG9008W User Manual page 72

3.4.8.2 Policy Route
Choose the menu Data Service→Route→Policy Route to load the following page.
Click the Index in the entry you want to modify. If you want to delete the entry, select it and click the Del.
Click the Add button to add a new entry.
The following items are displayed on this page:
► Enable PoliceRoute:
► Next Hop Type:
► Interface:
► Address:
► Description:
► Protocol:
► Source IP:
► Destination IP:
► Destination Port:
► Active Time:
► Active Day:
3.4.8.3 RIP
The Routing Information Protocol (RIP) is one of the oldest distance-vector routing protocols, which
employs the hop count as a routing metric.
3.4.8.3.1 RIP Service
Choose the menu Data Service→RIP→RIP Service to load the following page.
BG9008W User Manual
Figure 3-88 View Policy Route
Figure 3-89 Add or Modify Policy Route
Enable or disable the entry
Select from pull-down list: Interface, Address.
Specify the interface of next hop for the entry.
Specify the address of next hop for the entry.
Give description for the entry.
Specify the protocol, TCP, UDP or ALL.
Enter IP address or IP range of source in the rule entry.
Enter IP address or IP range of destination in the rule entry.
Specify port or port range of destination in the rule entry.
Specify the active time range for the rule entry.
Specify the active days for the rule entry.
Page 61 of 133