Gaoke BG9008W User Manual page 71

The following items are displayed on this screen:
► Enable:
► Destination IP:
► Netmask:
► Next Hop Type:
► Next Hop Interface:
► Next Hop Address:
► Valid:
3.4.8.1.2 IPv6
The menu IPV6 is hidden if you don't enable Ipv6 stack, please refer to configuration index
Network→IPv6 for detail setting.
Choose the menu Data Service→Route→Static Route→IPv6 to load the following page.
The configuration options of Ipv6 is similar to Ipv4, the prefix length is equal to mask of Ipv4 address.
BG9008W User Manual
Figure 3-86 Configure IPv4 Static Route
Select it to add and modify the current route. Conversely, disable the current
route.
Enter the destination host the route leads to.
Enter the Subnet mask of the destination network.
Include Next Hop Interface and Next Hop Address(see following option)
Specify the interface of next hop for current route
Specify the address of next hop for current route
Show the status of current route.
Figure 3-87 Configure IPv6 Static Route
Page 60 of 133