Upgrade - Gaoke BG9008W User Manual

End Day of Week Last in Month:
►
End Hour of Day:
►
Auto Configuration
2)
Choose Auto Configuration to load the following page:
The following items are displayed on this screen:
Enable NTP:
►
NTP Service Mode:
►
Primary NTP Server:
►
Second NTP Server:
►
Time Zone:
►
Update Interval:
►
3.8.2

Upgrade

3.8.2.1 Application
Firmware upgrade via WEB interface is available. There are 2 steps to complete firmware updating.
1) Choose menu "SystemUpgrade", then select the right firmware file, click Upgrade, wait a
few minutes for firmware downloading and programming.
2) Choose menu "System Reboot", then click Reboot button to reset the device.
3.8.2.2 Configuration
3.8.2.2.1 Update Configuration
Configuration updating via WEB interface is available. There are 2 steps to complete configuration
BG9008W User Manual
Specify the order of end weekday in the month, similar as Start
Day of Week Last in Month.
Specify the end hour of DST, range from 0 to 23 in one day.
Figure 3-166 Time Auto Configuration
Enable or disable NTP service.
Specify CPE role as NTP Client or both Client and Server.
Specify the primary NTP server for role as NTP client.
Specify the second NTP server for role as NTP client.
Enter the local time zone.
Specify update interval for role as NTP client.
Page 99 of 133