Table of Contents
Advertisement
The following items are displayed on this screen:
►
Tone Type:
Select the type of signal tone.
Dial Tone
►
User Define Enable:
►
Dial Tone Frequency 1:
►
Dial Tone Frequency 2:
Busy Tone
►
User Define Enable:
►
Busy Tone Frequency 1:
►
Busy Tone Frequency 2:
►
On Time:
►
Off Time:
Ring Back Tone
►
User Define Enable:
►
Ring Back Tone Frequency 1:
►
Ring Back Tone Frequency 2:
►
On Time:
►
Off Time:
Distinction
Ring: Specify the ring cadence for the FXS port. In these fields, you specify the on and off
pulses for the ring. The ring cadence that should be configured differs between internal call and external
call.
3.7.11.5
Packetizer Period
Packet Period defines how long the device sends a RTP packet to the other side. Choose the menu
Voice Service→FXO/FXS Management→Signal Tone to load the following page.
BG9008W User Manual
Figure 3-155 Signal Tone Parameters
Whether to use user-defined dial tone frequency.
Whether to use user-defined busy tone frequency.
Whether to use user-defined ringback tone frequency.
Page 93 of 133
Advertisement
Table of Contents
