User Management - Gaoke mg6008 Series User Manual

This is the first screen when we log in the web management system. User can view the Current information
in it, includes device name、product revision、revision date、DSP version、SIP version、static IP info、PPPoE
client info、DHCP client info、DHCP server info、line status info.
Click the "Quit" button on the upper right side to log off.
There are 13 menu items on configuration menu column on the left of the screen. They are shown below:
a) Network: Includes device network basic configuration (Static IP, DHCP Client, PPPoE Client) and
device network advanced configuration (DHCP Server, DNS Service, NTP Service, STUN, 802.1X,
802.1X);
b) SIP Protocol: parameter configuration about SIP Protocol.
c) Media Stream: parameter configuration about Audio Codec and DSP.
d) Line Config: parameter configuration about Gateway number prefix、port number register 、Call
Forward 、incoming number echo and so on.
e) Digit Map: A form of routing configuration. It based on regular expression, and can configure several
routes once.
f) Route Table: preview、add、delete and modify the route table.
g) VLAN Config：parameter configuration about vlan； （Only ET-type devices support this configuration
through WEB management system）
h) Value-added: parameter configuration about Call-snatch 、Call-hold 、confidence call 、Three-Way
Calling and so on.
i) System Tools: includes the tools of configuration saving、default configuration loading、Software
upgrade and so on.
j) Accounting: configuration about port permission accounting through the web port.
k) SNMP Config: configuration about SNMP parameter and alarm message.
l) Password: configuration about user password. There are three levels of users: common user、 senior user
and super user。
m) Device Info: the first screen when we log in the web management system. It's the Main screen.
Attention:
The number of the ports shown on the main screen will be different in types of device. For example,
MG6002 have 2 ports, MG6004 have 4 ports, MG6008 have 8 ports, MG6016 have 16 ports, and MG6032 have
32 ports.

4.2.2 User management

Click "Password" and then enter the user management page shown as figure 4-4. Password of common user,
senior user and super user can be modified in the menu of Password.
MG6000 Series Media Gateway User's Manual
Figure 4-3 "Device Info" page
- 25 -