Table of Contents
Advertisement
The following items are displayed on this screen:
Enable L2TP Server:
►
Local IP:
►
IP Address Pool Range:
►
Enable Authentication:
►
Enable Debug:
►
Click the Index in the entry you want to modify. If you want to delete the entry, select it and click the Del.
Click the Add button to add a new entry.
The following items are displayed on this screen:
Username:
Enter the account name of L2TP tunnel. It should be configured identically on server
►
and client.
Password:
Enter the password of L2TP tunnel. It should be configured identically on server and
►
client.
Binding IP:
Enter the IP address of the client which is allowed to connect to this L2TP server.
►
Description:
Enter the humane readable description for this account.
►
BG9008W User Manual
Figure 3-76 Configure L2TP Server
Enable or disable the L2TP server function globally.
Enter the local IP address of L2TP server.
Specify the start and the end IP address for IP Pool. The start IP address
should not exceed the end address and the IP ranges must not overlap.
Specify whether to enable authentication for the tunnel. If enabled, enter
the authentication secret.
Specify whether to enable the debug for L2TP.
Figure 3-77 Add or Modify L2TP Client Entry
Page 54 of 133
Advertisement
Table of Contents
