Table of Contents
Advertisement
►Voice
mail:
►Total Message
Time：The total time length is for all voice messages.
►Password:
►Action:
►Call Forwarding
Unconditional: If you enter a number for this parameter, any call to your extension
►Call Forwarding No
►Call Forwarding On
►Call Forwarding
UnRegistered: If you enter a number for this parameter, any call to your extension
►Hot
line:
►Session Time
Limit: The functionality will disconnect the call automatically when the call time
►CID
Restriction:
►CID Restriction
Over: This function is only valid for the call between two internal externsions.
►Enable No
Disturb:
►Enable Call
Waiting: When talking, a third party phone comes in and you can hear the beep
►Call Back On
Busy:
►Alarm
Clock:
Note：
Call waiting is only valid for FXS。
3.6.3.5
Advanced configuration
The following parameters can be configured in this page, like DISA, Route number, Fax model,
Media Transfer, Recording, Codec and Security Authentication.
Choose the menu SIP Account→Account Parameter→Advance Config to load the following
page.
BG9008W User Manual
Voice Service→Advance config→Supplementary.
Voicemail is used to convey a caller's recorded audio message when you can
not answer the phone. It contains a user interface to select, play and manage
messages.
When using to extract messages, you must input password.
When
the
total
voice message comes, it will be discarded or overwritten.
will be forwarding to that number, unconditional.
Reply:
If you enter a number for this parameter, any call to your extension
will be forwarding to that number when you don't reply the call.
Busy:
If you enter a number for this parameter, any call to your extension
will be forwarding to that number, on busy.
will be forwarding to that number when the registering of extension
fails.
Immediately hotline or delay hotline. Time 0 indicates immediate hotline,
otherwise
indicates
supplementary services is enabled, then dial function key to configure the
number, but note, can't use immediately hotline.
reached the specified value.
Enable or disable CID Restriction. If CID Restriction is enabled, the display
name content in sip package is anonymous. If Anonymous As UserName is
chosen, that user name content is anonymous also.
Allows you to totally block incoming calls at any time. If corresponding
function key of supplementary services is enabled, then dial function key
to configure.
tone. If corresponding function key of supplementary services is enabled, then
dial function key to configure.
When talking, a third party phone comes in and dial 1 after the
prompt tone. When you hang up, the system will call you and third party.
Alarm Clock lets the phone ring at a specified time for alerting.
Page 76 of 133
time
length
has
delay
hotline.
If
been
reached,
then
corresponding
function
if
new
key
of
Advertisement
Table of Contents
