Gaoke BG9008W User Manual
  1. Manuals
  2. Brands
  3. Gaoke Manuals
  4. Gateway
  5. BG9008W
  6. User manual

Gaoke BG9008W User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
BG9008W 
User Manual
Guangzhou Gaoke Communications Technology Co., LTD.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BG9008W and is the answer not in the manual?

Questions and answers

Related Manuals for Gaoke BG9008W

Summary of Contents for Gaoke BG9008W

  • Page 1 BG9008W  User Manual Guangzhou Gaoke Communications Technology Co., LTD.
  • Page 2 We are enthusiastic for providing tech support in every way. You can get in touch with local dearer as well as contact to Customer Service Department directly. Guangzhou Gaoke Communications Technology Co., LTD. Address: GaoKe Science Park, No.168 Gaopu Road, Guangzhou, P.R.C Tel: Central: +86-20-82598555 Customer services: +86-20-82598191 Fax: +86-20-82598121 +86-20-82599989 P.C.: 510663...
  • Page 3 Company Limited. No the trademarks may be counterfeited. Disclaimer Guangzhou Gaoke Communications Technology Company Limited reserves the right to change the document from time to time at its sole discretion, and not to make the notice to anyone in advance.
  • Page 4 Preface Version Statement This Manual is provided for BG9008W gateway, the software version must be at least 1.10. Brief Introduction This manual provides technical information on how to configure and operate application for your BG9008W unit. Chapter 1: Provides an overview of BG9008W...
  • Page 5 Table 3 Convention for Keyboard Operation Style Meanings “+”means an operation which presses down several keys in the Ctrl + C keyboard in the same time. E.g. “Ctrl + C” means press down the key of “Ctrl” and “C” in the same time。...

  • Page 6: Table Of Contents

    CONTENTS OVERVIEW ..............................1 PRODUCT INTRODUCTION ........................2 ............................2 PPEARANCE ........................... 3 ARDWARE NTERFACE ..............................4 EATURES ........................5 ORKING NVIRONMENT CONFIGURATION INTRODUCTION ......................6 ..............................6 OGIN ..............................6 ........................7 ETWORK ONFIGURATION 3.3.1 Network Status ..........................7 3.3.2 WAN Configuration ........................
  • Page 7 3.7.2 Time Lock ........................... 79 3.7.3 Ring Group ..........................80 3.7.4 Call Routing ..........................81 3.7.5 Auto Attendant ..........................82 3.7.6 Conference ..........................85 3.7.7 Multi-Function Phone ........................ 87 3.7.8 Voice Mail Number ........................87 3.7.9 Voice File ............................ 88 3.7.10 Record File ..........................
  • Page 8 4.6.1 Introduction ..........................115 4.6.2 Configuration ..........................116 4.6.3 Operation Guide ........................116 ......................116 ORWARDING ON 4.7.1 Introduction ..........................116 4.7.2 Configuration ..........................116 4.7.3 Operation Guide ........................116 ......................117 ORWARDING EPLY 4.8.1 Introduction ..........................117 4.8.2 Configuration ..........................117 4.8.3 Operation Guide ........................
  • Page 9 4.17.3 Operation Guide ........................125 4.18 ............................125 OLOR 4.18.1 Introduction ..........................125 4.18.2 Configuration ..........................125 4.18.3 Operation Guide ........................125 4.19 & W ........................125 LACKLIST HITELIST 4.19.1 Introduction ..........................125 4.19.2 Configuration ..........................125 4.19.3 Operation Guide ........................126 4.20 ......................
  • Page 10 4.29.1 Introduction ..........................131 4.29.2 Configuration ..........................131 4.29.3 Operation Guide ........................131 4.30 ........................132 BBREVIATED IALING 4.30.1 Introduction ..........................132 4.30.2 Configuration ..........................132 4.30.3 Operation Guide ........................132 CLI INTRODUCTION ..........................133 ..............................133 OGIN ............................134 ETWORK 5.2.1 3G Modem ..........................
  • Page 11 错误！未定义书签。 5.5.10 FXO/FXS Management................错误！未定义书签。 5.5.11 Advanced Configuration ..........................错误！未定义书签。 CCOUNT AND RUNK ARAMETER 错误！未定义书签。 5.6.2 Account Basic Parameter ................. 错误！未定义书签。 5.6.3 Account Voice Parameter ................. 错误！未定义书签。 5.6.4 Static IP Trunk .................... 错误！未定义书签。 5.6.5 Register IP Trunk ..........................错误！未定义书签。 ONFIGURE CCOUNT AND RUNK...

  • Page 12: Overview

    BG9008W User Manual 1 Overview A new series of ALL IN ONE INTELLIGENT Gateway BG9008W is perfectly designed for SOHO, small and medium sized business (SMB) requiring application-based solutions of low-capital investment to communicate with various kinds of users, the complete IP PBX features are built in.

  • Page 13: Product Introduction

    BG9008W User Manual 2 Product Introduction 2.1 Appearance Figure 2-1 BG9008W Front View Table 2-1 Status Indication Power is off Solid Green Device is running Power is off INTERNET type WAN PPPoE connection INTERNET Slow Flash Green authenticate failed Solid Green...

  • Page 14: Hardware Interface

    BG9008W User Manual Phone is onhook Phone1&2 Solid Green Phone is offhook No VPN connection Solid Green VPN is established All accounts register failure Solid Green All accounts register successfully Some accounts register successfully and Flash Green rest register fails...

  • Page 15: Features

    BG9008W User Manual 1 Gigabit fiber interface 2 USB 2.0 port, use for storage or 3G modem 2.3 Features Data Network  WAN: 1xGE,1xSFP and 1xUSB port for 2G/3G USB Modem Connectivity  LAN: 2x10/100/1000 Mbps Ethernet Port  WAN Access Mode: Static IP address, PPPoE, DHCP, PPTP and L2TP ...

  • Page 16: Working Environment

    BG9008W User Manual Call Pickup   Three-way Calling  Conference  Ring groups  Check phone number  Time lock  Auto attendant  DISA  Voicemail  Call Restriction  Color Ring  Blacklist & Whitelist  Alarm Clock ...

  • Page 17: Configuration Introduction

    BG9008W User Manual 3 Configuration Introduction 3.1 Login The Web interface is ready for accessing about one minute after the device power on. The default LAN IP address is 192.168.100.1, you can access the Web interface via either WAN port or LAN port.

  • Page 18: Network Configuration

    BG9008W User Manual Figure 3-2 System Status 3.3 Network Configuration 3.3.1 Network Status The Status page shows all WAN and LAN interfaces configuration, and all physical ports connection status related to this device. 3.3.1.1 WAN Status Choose the menu Network→Status→WAN to load the following page.

  • Page 19: Wan Configuration

    BG9008W User Manual Figure 3-4 LAN Status 3.3.1.3 Link Status Choose the menu Network→Status→Link Status to load the following page. Figure 3-5 Link Status 3.3.2 WAN Configuration The device supports 5 WAN interfaces:DATA,VOICE,MGMT,OTHER1,OTHER2; Every WAN interface provides the following five Internet connection types: Static IP,DHCP,PPPoE,PPTP,L2TP.
  • Page 20 BG9008W User Manual Figure 3-7 WAN-Static IP The following items are displayed on this screen: Enable: Enable this WAN interface (DATA can’t be disabled). ► Type: Select Static IP if your ISP has assigned a static IP address for your.
  • Page 21 BG9008W User Manual Figure 3-8 WAN-DHCP The following items are displayed on this screen: Enable: Enable this WAN interface (DATA can’t be disabled). ► Type: Select DHCP if your ISP assigns the IP address automatically. ► VLAN Enable: Optional. Enable VLAN to configure VLAN ID and VLAN Priority Level.
  • Page 22 BG9008W User Manual please choose the PPPoE connection type (Used mainly for DSL Internet service). Figure 3-9 WAN-PPPoE The following items are displayed on this screen: Enable: Enable this WAN interface (DATA can’t be disabled). ► Type: Select PPPoE if your ISP provides xDSL Virtual Dial-up connection.
  • Page 23 BG9008W User Manual Figure 3-10 WAN-L2TP The following items are displayed on this screen: Enable: Enable this WAN interface (DATA can’t be disabled). ► Type: Select L2TP if your ISP provides a L2TP connection. ► VLAN Enable: Optional. Enable VLAN to configure VLAN ID and VLAN Priority Level.
  • Page 24 BG9008W User Manual vendor type and configuration of a DHCP client. ► Enterprise Code: Optional. ► Manufacture Name: Optional. ► Device Class: Optional. ► Device Type: Optional. ► Device Version: Optional. 5) PPTP If your ISP (Internet Service Provider) has provided the account information for the PPTP connection, please choose the PPTP connection type.

  • Page 25: Lan Configuration

    BG9008W User Manual manually. If you are not clear, please consult your ISP. It’s not allowed to access the Internet via domain name if the Primary DNS field is blank. Secondary DNS: Optional. If a Secondary DNS Server address is available, enter it.
  • Page 26 BG9008W User Manual Figure 3-12 LAN page 1) Part 1: Configure LAN interfaces Click the Interface Name of existent LAN interface you want to modify. If you want to delete the entry, select it and click the Del (the VLAN1 is default existed, can’t be removed).
  • Page 27 BG9008W User Manual The following items are displayed on this part. ► Interface Name: Name of this LAN interface. ► IP Address: Enter the IP address for this LAN interface. ► Netmask: Enter the subnet mask for this LAN interface.

  • Page 28: Wlan

    BG9008W User Manual The following items are displayed on this part. ► LAN Isolate: Check the box to prohibit the access between LAN interfaces. ► Auto Bridge: Check the box to dynamically create IPTV bridge for STB. ► DHCP Vendor ID: Vendor class identifier List (DHCP 60 option), support at most two vendor IDs.
  • Page 29 11n or 11b/g/n Wireless mode, this configuration is required. Two values of width are provided: 20MHz and 20/40MHz. The Service Set Identifier (SSID) is used to identify an 802.11 (Wi-Fi) network and it’s discovered by network sniffing/scanning. BG9008W provides up to four SSID. ► Enable: Enable or disable this entry of SSID.
  • Page 30 BG9008W User Manual ► WPA Pre-Shared Key: You can enter ASCII characters between 8 and 64 characters. ► Renew Interval: Specify the group key update interval in seconds. Enter 0 to disable the update. 2) Open WEP, Shared WEP, WEP Auto: It is based on the IEEE 802.11 standard. Choose one of these types, the following page is loaded.
  • Page 31 BG9008W User Manual The following items are displayed on this screen: ► SSID: The SSID enabled in WLAN→Basic Settings page.Read only ► Authentication: The authentication type selected: WPA, WPA2, WPA/WPA2. ► Algorithm: You can select either TKIP, or AES or TKIP/AES.
  • Page 32 BG9008W User Manual 2) PBC Mode If PBC mode is selected, the following page is loaded. Figure 3-19 Configure WIFI WPS-PBC The following items are displayed on this screen: ► Enable WPS: Enable or disable the WIFI WPS function globally.
  • Page 33 BG9008W User Manual 3.3.4.5 Clients Info Choose the menu Network→WLAN→Clients Info to load the following page. Figure 3-21 View Wifi Clients Info This page shows all connected WIFI client information, read only. The following items are displayed on this screen: ►...

  • Page 34: Modem

    BG9008W User Manual Figure 3-23 Add WIFI MAC Filtering Entry Enter the appropriate MAC Address into the MAC field. The format of the MAC Address is XX:XX:XX:XX:XX:XX (X is any hexadecimal digit). Click Add button to add MAC address to the Selected List, click Del button to delete the selected MAC address in the Selected List.
  • Page 35 BG9008W User Manual Figure 3-24 Configure 3G Modem-Basic Settings The following items are displayed on this screen: ► SP Network: Other or Swisscom. If it is not the target user, you need to select the other. ► Connect Mode: Manual or Auto. The default is Auto.

  • Page 36: Port Management

    BG9008W User Manual link. ► Heartbeat Address: Set the heartbeat detecting address of the link, the default configuration is not required. 3) Status Figure 3-26 Configure 3G Modem-Status The following items are displayed on this screen: ► Device Status: Indicates whether to insert 3G module.

  • Page 37: Ipv6 Configuration

    BG9008W User Manual The following items are displayed on this screen: ► Enable Port Mirror: Enable or disable port mirror. ► Destination Port: The duplicate of packets from Source Port will send to this destination port. ► Source Port: All packets received from Source Port will be duplicated and the duplicate will be send to Destination Port.
  • Page 38 BG9008W User Manual Figure 3-29 Configure IPv6 The following items are displayed on this screen: ► IP Stack Version: Choose the IP stack version to use. Provides the following three types: IPv4,IPv6,IPv4/v6. WAN Configuration ► Enable WAN: If IPv6 or IPv4/v6 is chosen, select this to enable IPv6 stack on WAN.

  • Page 39: Data Service

    BG9008W User Manual SLAAC(Stateless address autoconfiguration)+DHCPv6 DHCPv6 ► Manual Allocate Address Prefix: Configure the manual allocate address prefix. ► Prefix Life Time: Enter the life time of prefix. ► Default Gateway Life Time: Enter the life time of default gateway.

  • Page 40: Dhcp Server

    BG9008W User Manual Figure 3-32 Route Table 3.4.1.4 Net State Choose the menu Data Service→Status→Net State to load the following page. Figure 3-33 Net State 3.4.2 DHCP Server 3.4.2.1 Static Address Assign Choose the menu Data Service→DHCP Server→Static Address Assign, and then you can view and add address which is assigned for clients.
  • Page 41 BG9008W User Manual Figure 3-34 View Static Address Assign Configuration Click the Index in the entry you want to modify. If you want to delete the entry, select it and click the Del. Click the Add button to add a new entry.

  • Page 42: Nat Config

    BG9008W User Manual Figure 3-37 DHCP Relay Overview Choose the menu Data Service→DHCP Server→DHCP Relay to load the following page. Figure 3-38 Configure DHCP Relay The following items are displayed on this screen: Enable DHCP Relay: Enable or disable DHCP Relay.
  • Page 43 BG9008W User Manual Figure 3-39 Basic Settings The following items are displayed on this screen: Max Nat Connections: Specify the maximum number of NAT connections. ► Enable MSS Auto Adaptive: Enable or disable auto adaptive the value of MSS(Maximum Segment ►...
  • Page 44 BG9008W User Manual Figure 3-41 Add or Modify PAT Entry The following items are displayed on this screen: Enable: Enable or disable this PAT entry. ► Internet Port: Enter the service port provided for accessing external network. All the requests ►...

  • Page 45: Firewall Config

    BG9008W User Manual DMZ Private IP: The private IP address for this DMZ entry. ► Description: Enter a description string for this DMZ entry ► 3.4.3.4 ALG Settings Application Layer Gateway (ALG) allows customized Network Address Translation (NAT) traversal filters to be plugged into the gateway to support address and port translation for certain application layer "control/data"...
  • Page 46 BG9008W User Manual Figure 3-45 Attack Defense The following items are displayed on this screen: Enable Broadcast Storm Defense: Enable or disable Broadcast Storm Defense. ► Enable Block Ping: Enable or disable Block Ping function. ► Enable TCP SYN Flood Defense: Enable or disable TCP SYN Flood Defense.
  • Page 47 BG9008W User Manual intended victim's spoofed source IP address. Check the box to enable Fraggle Defense. Enable Smurf Defense: The Smurf Attack is a denial-of-service attack in which large ► numbers of Internet Control Message Protocol (ICMP) packets with the intended victim's spoofed source IP are broadcast to a computer network using an IP Broadcast address.
  • Page 48 BG9008W User Manual Figure 3-48 View Access Control Entry The following items are displayed on this screen: Enable Access Control: Enable or disable access control from WAN. ► Policy: Default policy of access control: Allow or Deny. If Allow is selected, all ►...
  • Page 49 BG9008W User Manual Choose the menu Data Service→Firewall Config→Internet Access-Ctrl→User Authentication to load the following page. Figure 3-50 View User Authentication Entry The following items are displayed on this screen: Enable User Authentication: Enable or disable user authentication globally. If enabled, only the ►...
  • Page 50 BG9008W User Manual browser. When accessing the Internet for the first time, the specified HTTP page will be pushed to the browser when enabled. Choose the menu Data Service→Firewall Config→Internet Access-Ctrl→Page Push to load the following page. Figure 3-52 Configure Page Push...
  • Page 51 BG9008W User Manual Internet Web Access: Allow Access: If enabled, allow user to access the device from the Internet via WEB. ► IP Limit: If enabled, allow only specific IP range to access the device from the Internet via ►...
  • Page 52 BG9008W User Manual Intranet Web Access: Allow Access: If enabled, allow access to the device from the Intranet via telnet. ► IP Limit: If enabled, allow only specific IP range to access the device from the Intranet via ► telnet...
  • Page 53 BG9008W User Manual device from the Intranet via SSH. 3.4.4.5 Filter Strategy Each sub-page under this page is used to filter Internet access. 3.4.4.5.1 Keyword Filter Choose the menu Data Service→Firewall Config→Filter Strategy→Keyword Filter to load the following page. Click the Index in the entry you want to modify. If you want to delete the entry, select it and click the Del.
  • Page 54 BG9008W User Manual Figure 3-57 Configure IP Filter The following items are displayed on this screen: IP Filter: If enabled, packet filtering is enabled by IP address. ► Policy: The policy for IP address list. Deny and Allow. ► You can export all the IP addresses as a file. Of course, you can also import a file.
  • Page 55 BG9008W User Manual Figure 3-59 Add a MAC Filter Entry 3.4.4.6 IP&MAC Binding Choose the menu Data Service→Firewall Config→IP&MAC Binding to load the following page. There are two ways to add a binding entry: You can manually enter a pair of IP and MAC, and then press Add Item.

  • Page 56: Qos

    BG9008W User Manual 3.4.5 3.4.5.1 Basic Settings QOS feature is enabled by default, based on 802.1P, strict priority scheduling mode. The device supports four priority queues, when QOS feature enabled. Choose the menu Data Service→QoS→Basic Settings to load the following page.
  • Page 57 BG9008W User Manual Bandwidth Setting Upstream Bandwidth: Configure the bandwidth of upstream. ► Downstream Bandwidth: Configure the bandwidth of downstream. ► Advanced Parameters Enable Voice Reservation: Enable voice reservation and give the value to reserved for voice ► Enable Video Reservation: Enable video reservation and give the value to reserved for video ►...
  • Page 58 BG9008W User Manual Figure 3-63 View QoS Flow Rate Limit Entry Click the Index in the entry you want to modify. If you want to delete the entry, select it and click the Del. Click the Add button to add a new entry.
  • Page 59 BG9008W User Manual Figure 3-65 Configure Custom of Qos Flow Rate Limit The following items are displayed on this screen: Protocol Type: Custom protocol type, UDP or TCP. ► Port Range: Set port range. ► 3.4.5.4 Service The device supports to remap scheduling priority and remark the value of DSCP or 802.1P according to the service type.
  • Page 60 BG9008W User Manual Click the Del in the entry you want to delete. Click the Index or Detail in the entry you want to modify, and then the following page will be loaded: Figure 3-68 Modify Qos ACL The following items are display on this page: Condition: ►...

  • Page 61: Ddns

    BG9008W User Manual Figure 3-70 L2 Data Rule Type The following items are display on this page: ► SRC MAC: Source MAC address of packets. ► DEST MAC: Destination MAC address of packets. ► Ether Type: The ether type of packets.
  • Page 62 BG9008W User Manual Figure 3-71 Configure DDNS The following items are display on this page: ► DDNS Enable: Active or inactive dynamic DNS service. ► Username: Enter account name of your DDNS account. ► Password: Enter password of your DDNS account.

  • Page 63: Vpn

    BG9008W User Manual 3.4.7 VPN (Virtual Private Network) is a private network established via the public network, generally via the Internet. However, the private network is a logical network without any physical network lines, so it is called Virtual Private Network.
  • Page 64 BG9008W User Manual Figure 3-74 Configure PPTP Server The following items are displayed on this screen: Enable PPTP Server: Enable or disable the PPTP server function globally. ► IP Address Pool Range: Specify the start and the end IP address for IP Pool. The start IP address ►...
  • Page 65 BG9008W User Manual Figure 3-76 Configure L2TP Server The following items are displayed on this screen: Enable L2TP Server: Enable or disable the L2TP server function globally. ► Local IP: Enter the local IP address of L2TP server. ► IP Address Pool Range: Specify the start and the end IP address for IP Pool.
  • Page 66 BG9008W User Manual 3.4.7.4 IPSEC IPSEC (IP Security) is a set of services and protocols defined by IETF (Internet Engineering Task Force) to provide high security for IP packets and prevent attacks. To ensure a secured communication, the two IPSEC peers use IPSEC protocol to negotiate the data encryption algorithm and the security protocols for checking the integrity of the transmission data, and exchange the key to data de-encryption.
  • Page 67 BG9008W User Manual Figure 3-79 Add or Modify IKE Safety Proposal Entry The following items are displayed on this screen: Proposal Name: Specify a unique name to the IKE proposal for identification and management ► purposes. The IKE proposal can be applied to IPSEC proposal.
  • Page 68 BG9008W User Manual Figure 3-81 Add or Modify IKE Safety Policy Entry The following items are displayed on this screen: Policy Name: Specify a unique name to the IKE policy for identification and management ► purposes. The IKE policy can be applied to IPSEC policy.
  • Page 69 BG9008W User Manual Proposal Name: Specify a unique name to the IPSEC Proposal for identification and ► management purposes. The IPSEC proposal can be applied to IPSEC policy. IPSec Protocol: Select the security protocol to be used. Options include: ►...

  • Page 70: Routing

    BG9008W User Manual Figure 3-85 Add or Modify IPSEC Safety Policy Entry The following items are displayed on this screen: Enable Ipsec: Enable or disable this IPSEC entry. ► IPSEC Policy Name: Specify a unique name to the IPSEC policy.
  • Page 71 BG9008W User Manual Figure 3-86 Configure IPv4 Static Route The following items are displayed on this screen: ► Enable: Select it to add and modify the current route. Conversely, disable the current route. ► Destination IP: Enter the destination host the route leads to.
  • Page 72 BG9008W User Manual 3.4.8.2 Policy Route Choose the menu Data Service→Route→Policy Route to load the following page. Figure 3-88 View Policy Route Click the Index in the entry you want to modify. If you want to delete the entry, select it and click the Del.
  • Page 73 BG9008W User Manual Figure 3-90 RIP Service Configuration The following items are displayed on this page: ► Enable RIP Service: Enable or disable RIP service function globally. Click the Index in the entry you want to modify. If you want to delete the entry, select it and click the Del.

  • Page 74: Advanced Parameters

    BG9008W User Manual Figure 3-92 View RIP Key Chain Configuration The following items are displayed on this page: ► Key Chain Name: Enter the name of key chain. Click the Index in the entry you want to modify. If you want to delete the entry, select it and click the Del.

  • Page 75: Multicast

    BG9008W User Manual Figure 3-94 Configure UPnp The following items are displayed on this screen: Enable UPnP: Enable or disable the UPnP function globally. ► Upstream Interface: The network interface connected to the DLNA server. ► Downstream Interface: The network interface connected to the DLNA client.

  • Page 76: Sip Trunk Configuration

    BG9008W User Manual Figure 3-97 Add or Modify User Management Entry The following items are displayed on this screen: Username: Enter user name of this entry. ► Password: Enter password of this entry. ► Access Right: Select access right from pull-down list, Read or Read/Write.

  • Page 77: Introduction About Sip

    BG9008W User Manual technology, the most popular protocol is Session Initiation Protocol(SIP). SIP trunk is a VoIP service based on the SIP by which Internet telephony service providers (ITSPs) deliver telephone services and unified communication to customers equipped with private branch exchange (IP-PBX) facilities.
  • Page 78 BG9008W User Manual Figure 3-101 General Parameters of SIP Service The following items are displayed on this screen: ► Primary Server Address: Domain or IP of SIP server. ► Primary Server Port: Listening port of SIP server. ► Enable Backup Server: Enable or disable backup SIP server.

  • Page 79: Register Ip Trunk

    BG9008W User Manual Figure 3-102 Advanced Parameters of SIP Service The following items are displayed on this screen: ► Enable Alive: After successful registration, whether or not to send keep-alive packets. ► Keep Alive Mode: Keep alive mode: CLRF, OPTIONS or PING.
  • Page 80 BG9008W User Manual group, binding callee and matched caller. Choose the menu SIP Trunk→Register IP Trunk→Registered IP Trunk to load the following page. Figure 3-103 Registered IP Trunk List The following items are displayed on this screen: ► Query: Filtering out the specified accounts.

  • Page 81: Wildcard Group Register

    BG9008W User Manual name. 3.5.5 Wildcard Group Register This function must be supported by SIP server or IMS platform, in order to reduce the number of registering packets. Registered IP trunk accounts are divided into groups. Each group only one account registers to the server.

  • Page 82: Sip Account Configuration

    BG9008W User Manual The following items are displayed on this screen: ► Trunk Name: The description of the trunk. ► Group Number: Each static IP trunk is required to specify a SIP trunk group number which will be used in the call routing.

  • Page 83: Account Parameter

    BG9008W User Manual ►Del: Delete the selected accounts. ►Add: On click Add button to load the following page. Figure 3-110 Parameters of SIP Account ►Generated: Generate a random password. ►Batch: Increase in batch SIP account, account name and password. 3.6.3 Account Parameter Choose the menu SIP Account→Account Parameter to load the following page.
  • Page 84 BG9008W User Manual 3.6.3.2 Called Number Called number is just the phone number. The device defines two types of called number, internal called number and external called number. The internal called number is only use for internal calls, the external called number is use for Direct Inward Dialing (DID). The device supports up to 10 called numbers, the first called number, also named extension number, should be unique in order to distinguish each extension.
  • Page 85 BG9008W User Manual Figure 3-114 Caller Number ►Get Callee: Get called number and configure to Caller ID. Note： When calling out from registered IP trunk, Caller number must partially or completely match outgoing caller of registered IP trunk account. 3.6.3.4...
  • Page 86 BG9008W User Manual Figure 3-115 Parameter of Supplementary The following items are displayed on this screen: ►Call Out Permission: Call permission is used to control whether or not you can dial some phone numbers, such as long distance call, international long distance call. The device has 5 levels of call permission by default.
  • Page 87 BG9008W User Manual Voice Service→Advance config→Supplementary. ►Voice mail: Voicemail is used to convey a caller's recorded audio message when you can not answer the phone. It contains a user interface to select, play and manage messages. ►Total Message Time：The total time length is for all voice messages.
  • Page 88 BG9008W User Manual Figure 3-116 Advanced Parameters of Account The following items are displayed on this screen: ►Route The system supports up to ten call route tables. The parameter is the index of call routing table. ►Media Transfer: RTP media stream to go directly between the caller and the callee.
  • Page 89 BG9008W User Manual Service Control. Choose the menu SIP Account→Account Parameter→Incoming Black&White List to load the following page. Figure 3-117 Incoming Black&White List On click Add button to load the following page. Figure 3-118 Parameters of Black&White List 3.6.3.7 Outgoing Black&White List Blacklist &...

  • Page 90: Voice Service Configuration

    BG9008W User Manual Figure 3-121 Abbreviated Dialing List On click Add button to load the following page. Figure 3-122 Parameters of Abbreviated Dialing 3.7 Voice Service Configuration 3.7.1 Permission Definition Permissions define the meaning and weight, Call route and user need to configure permission.

  • Page 91: Ring Group

    BG9008W User Manual time lock has 6 time period settings and a holiday setting. Holidays can be configured to any day you need. If you want to active all rules, you must enable time lock firstly. Choose the menu Voice Service→Time Lock to load the following page.

  • Page 92: Call Routing

    BG9008W User Manual On click Add button to load the following page. Figure 3-128 Parameters of Ring Group The following items are displayed on this screen: ►Group Number: The group number which can be called. ►Group Type: Internal number or external number.

  • Page 93: Auto Attendant

    BG9008W User Manual Figure 3-131 Call Routing List On click Add button to load following page. Figure 3-132 Parameters of Call Route The following items are displayed on this screen: ►Phone Prefix： A call to the destination number which starts with this prefix will be routed with the corresponding call route table.
  • Page 94 BG9008W User Manual up to 20 phone numbers. 3.7.5.1 Configuration instructions 3.7.5.1.1 Generic Choose the menu Voice Service→Auto Attendant→Generic to load the following page. Figure 3-134 Generic parameters of Auto Attendant The following items are displayed on this screen: ►AutoAttendant: Enable or disable Auto attendant.
  • Page 95 BG9008W User Manual Figure 3-137 Parameters of IVR Menu The following items are displayed on this screen: ►Auto Transfer To Key 0: Automatically transferred to the corresponding number of key 0 after playing greeting message. ►Call Queue Enable: This function is for the 0 key bindings extension. If o key binding extension is calling, third party will be queued, otherwise will hear busy tone.

  • Page 96: Conference

    BG9008W User Manual 3.7.6 Conference Conference call allows the calling party to call the other participants and add them to the conference room. It also allows the called party to participate during the conference call. 3.7.6.1 Conference Room Choose the menu Voice Service→Conference→Conference Room to load the following page.
  • Page 97 BG9008W User Manual PIN. ►Start Time: Start time for private conference. ►End Time: End time for private conference. ►Max Participants: Max participants for this conference room. 3.7.6.2 Functions Keys Choose the menu Voice Service→Conference→Function Keys to load the following page.

  • Page 98: Multi-Function Phone

    BG9008W User Manual ►Lock Conference Room: Nobody can join the conference after the conference is locked unless the moderator calls them or unlocks the conference. 3.7.7 Multi-Function Phone 3.7.7.1 Configuration instructions Choose the menu Voice Service→Multic-Function Phone to load the following page.

  • Page 99: Voice File

    BG9008W User Manual Figure 3-146 Access Number of Voice Mail 3.7.9 Voice File 1)IVR Menu: Choose the menu Voice Service→Voice File→IVR Menu to load the following page. Figure 3-147 Voice File of IVR Menu The following items are displayed on this screen: ►Prompt...

  • Page 100: Record File

    BG9008W User Manual Set this music file which is used in ringback tone. 3.7.10 Record File 1)Call Recording: Choose the menu Voice Service→Record File→Call Recording to load the following page. Figure 3-150 Call Recording List The call recording files can be filtered out with the extension number, start time, end time.

  • Page 101: Fxo/Fxs Management

    BG9008W User Manual 3.7.11 FXO/FXS Management 3.7.11.1 FXS Parameters Choose the menu Voice Service→FXO/FXS Management→FXS Parameters to load the following page. Figure 3-153 FXS Parameters The following items are displayed on this screen: ► Min Flash Detect Time: The minimum time to detect the flash.
  • Page 102 BG9008W User Manual Figure 3-154 DSP Parameters The following items are displayed on this screen: ► Echo Cancellation: Enable or disable echo cancellation. ► Silence Detection/Suppression: Enable or disable silence detection and silence suppression. ► Input Gain: Configure the input gain value.
  • Page 103 BG9008W User Manual Connects the start and the end of a range Indicates the a range of numbers(not letters). Matches an arbitrary number of occurrences of the preceding digit, including 0. Indicates a choice of matching expressions (OR). Inter-digit timeout expires...
  • Page 104 BG9008W User Manual Figure 3-155 Signal Tone Parameters The following items are displayed on this screen: ► Tone Type: Select the type of signal tone. Dial Tone ► User Define Enable: Whether to use user-defined dial tone frequency. ► Dial Tone Frequency 1: ►...

  • Page 105: Advanced Config

    BG9008W User Manual Figure 3-156 Packetizer Period ► G.711A Packet Period: RTP packetization period of G.711A codec. ► G.711u Packet Period: RTP packetization period of G.711U codec. ► G.723 Packet Period: RTP packetization period of G.723 codec. ► G.729 Packet Period: RTP packetization period of G.729 codec.
  • Page 106 BG9008W User Manual Figure 3-159 Access Number of DISA The following items are displayed on this screen: ►Internal number: Phone number to access the DISA IVR system. ►Extenal number: DID number for external users to access the DISA IVR system.
  • Page 107 BG9008W User Manual Figure 3-162 SIP Service Control Parameters The following items are displayed on this screen: ►Centrex: Whether or not to enable centrex function globally. ►Call Time Limit: Set the call time to prevent long talk. ►Internal Music: Hear music when extensions call each other.
  • Page 108 BG9008W User Manual Figure 3-163 Supplementary Service Key List The items can only be modified, and can't be added, deleted. 3.7.12.6 Supplementary Service Choose the menu Voice Service→Advance Config→Supplementary to load the following page. Figure 3-164 Call Restriction Parameters Page 97 of 133...

  • Page 109: System

    BG9008W User Manual Four time-lock corresponding permissions, one must be chosen when user enables password lock. 3.8 System 3.8.1 Time Management Menu of time management is used to manage system time. Manual Configuration Choose the menu Data Service→Time Management and select Manual Configuration to load the following page.

  • Page 110: Upgrade

    BG9008W User Manual End Day of Week Last in Month: Specify the order of end weekday in the month, similar as Start ► Day of Week Last in Month. End Hour of Day: Specify the end hour of DST, range from 0 to 23 in one day.

  • Page 111: Reboot System

    BG9008W User Manual updating. Choose menu “SystemUpgrade”, then select the right configuration file, click Upgrade, wait a few seconds for downloading and programming. Choose menu“System Reboot”, then click Reboot button to reset the device. 3.8.2.2.2 Export Configuration Configuration exporting via WEB interface is available. Click the "Export Configuration File" to export the configuration file.
  • Page 112 BG9008W User Manual Figure 3-168 Ping Diagnostic The following items are displayed on this screen: ► Ping: Enter the IP Address or Domain Name of the PC whose connection you wish to diagnose. ► Ping Count: Specifies the number of Echo Request messages sent.

  • Page 113: User Management

    BG9008W User Manual ► Protocol: By selecting the protocol, only packets of this protocol will be captured. ► Tcpdump: Enter some options of tcpdump(e.g. -n -s0 -c 100) ► Result: This page displays the result of capture packets. Click Start button to capture the packets which correspond to the configuration requirement.

  • Page 114: System Log

    BG9008W User Manual Click the Save button when finished. 3.8.7 System Log 3.8.7.1 Log Config Choose the menu System→System Log→Log Config to load the following page. Figure 3-172 Configure System Log The following items are displayed on this screen: ►...

  • Page 115: Tr069

    BG9008W User Manual Click the Export button to export all the local logs as a file. Click the Clear button to clear all the local logs from the device permanently, not just from the page. Click Refresh button to refresh the web page.

  • Page 116: Snmp

    BG9008W User Manual Server using the Inform method call. Enter the duration in seconds of the interval if enabled. ► Single Account Enable: Whether or not the TR069 Account is enabled. ► TR069 Account: Username used to authenticate the CPE when making a connection to the ACS.

  • Page 117: User Access Right

    BG9008W User Manual ► Server Port: Enter the port of Register Server. ► TRAP Message Interval: Set the sending interval between TRAP messages. ► Regional Identity: Set the identity of regional. ► Device Identifier: Set the identifier of device. ►...

  • Page 118: Apply

    BG9008W User Manual Figure 3-177 Modify User Access Right 3.9 Apply Follow the prompts,Some parameters will take effect after click the button of “Apply”. Page 107 of 133...

  • Page 119: Print Function

    BG9008W User Manual Figure 3-178 Apply 3.10 Print Function The device supports to link printer port and provides share printing capabilities to other computers. To use print function, you need do the following steps. Add Printer Open the windows of the Control Panel, select Printers and Faxes, and add the printer...
  • Page 120 BG9008W User Manual Figure 3-180 Connecting local printer Create a new port Select "Create a new port" and select "Standard TCP / IP Port" Figure 3-181 Create a new port Page 109 of 133...
  • Page 121 BG9008W User Manual Add print device Click Next, and add IP devices, assuming the device IP is 192.168.1.1. Figure 3-182 Add IP LAN devices Configure printer port Select "Custom", click "Settings" to confirm the agreement as "RAW (R)" Page 110 of 133...
  • Page 122 BG9008W User Manual Figure 3-183 Configuer printer port Add Printer Driver According to the printer manufacturer and printer type, select the appropriate driver. If the computer has not printer driver, you need to install the printer driver. After adding the printer, you can print through the USB printer.
  • Page 123 BG9008W User Manual Figure 3-184 Add Printer Driver Page 112 of 133...

  • Page 124: Voice Functions Introduction

    BG9008W User Manual 4 Voice Functions Introduction 4.1 Check Phone Number 4.1.1 Introduction You can dial a specified number to check your own extension number. The number to be reported is the first group of caller number. 4.1.2 Configuration The default number for checking is 114. WEB configuration: Choose the menu: Voice Service→Advance Config→Supplementary Key, and click Search number.

  • Page 125: Call Transfer

    BG9008W User Manual 8:30, extension B can dial long distance call, extension A can not dial long distance call. 12:30, extension A can only dial internal call, extension B can dial local call and internal call. 15:00, extension B can dial long distance call, extension A can not dial long distance call.

  • Page 126: Call Pickup

    BG9008W User Manual There are 3 situations next:  A press transfer button again, A and B in conversation;  A call user C, press transfer button before C answer, A and B in conversation;  A call user C, C answer, A and C in conversation;...

  • Page 127: Configuration

    BG9008W User Manual 4.6.2 Configuration Enable “Set Call Forward Unconditional” and “Cancel Call Forward Unconditional”. WEB configuration: Choose the menu: Voice Service→Advance Config→Supplementary Key. Set CFU number. WEB configuration: Choose the menu: SIP Account→Account Parameter→Supplementary. Keypad service system: *57*TN#, TN is the phone number to be redirected to.

  • Page 128: Call Forwarding No Reply

    BG9008W User Manual 4.8 Call Forwarding No Reply 4.8.1 Introduction Call Forwarding No Reply (CFNR) allows an incoming call to be redirected to another phone number when the user is no reply within a specified period of time. 4.8.2 Configuration Enable “Set Call Forward No Reply”...

  • Page 129: Operation Guide

    BG9008W User Manual Keypad service system: #43#. 4.9.3 Operation Guide SIP user A off-hook, press “*43*8001#”, 8001 is the phone number of C, voice prompts “operation is successful” will be heard; A unregister from the device; User B call A, C start ring;...

  • Page 130: Auto Attendant

    BG9008W User Manual C answer, D and C in conversation; D hang up and dial 87654321 again, B start ring. 4.11 Auto Attendant 4.11.1 Introduction Auto attendant service allows callers to be automatically transferred to an extension without the intervention of an operator, and also allows a caller to reach a live operator by dialing a number, usually "0".

  • Page 131: Disa

    BG9008W User Manual User E dial 87654321 next, dial 0, B start ring; B answer, B and E in conversation; B transfer the call to extension C, C answer, B and C in conversation; D hang up, E hang up;...

  • Page 132: Operation Guide

    BG9008W User Manual WEB configuration: Choose the menu: SIP Account→Advance Config. Modify DISA direct dialing key. WEB configuration: Choose the menu: Voice Service→Advance Config→DISA Number. 4.12.3 Operation Guide DISA access number is 333, account length is 4. Extension number of user A is 8001, DISA password is 1234, call permission is Long Distance, and current call permission is degraded to Internal by Call Restriction feature.

  • Page 133: Operation Guide

    BG9008W User Manual  Mute: mute moderator self or other participants. Instructions for participant mute, mute keys+ participant number.  Mute&Deaf: mute and deaf moderator self.  Invite Member: add participant to the conference call.  Kick Member: Kick participant to the conference call.

  • Page 134: Operation Guide

    BG9008W User Manual WEB configuration: Choose the menu: SIP Account→Account Parameter→Supplementary. 4.14.3 Operation Guide Voice mail number is 7777, Extension A enable voice mail. A off-hook, keep busy; B make a call to A, the call will be transferred to the voice mail;...

  • Page 135: Configuration

    BG9008W User Manual party call base on Call Holding or Call Waiting. 4.16.2 Configuration Enable “Set Call Waiting” and “Cancel Call Waiting” WEB configuration: Choose the menu: Voice Service→Advance Config→Supplementary Key. Enable call waiting. WEB configuration: Choose the menu: SIP Account→Account Parameter→Supplementary.

  • Page 136: Operation Guide

    BG9008W User Manual Keypad service system: *54*KSSSS#, K stands for call permission, SSSS is the PIN code. Cancel Call Restriction WEB configuration: Choose the menu: SIP Account→Account Parameter→Supplementary. Keypad service system: #54*SSSS#, SSSS is the PIN code. 4.17.3 Operation Guide Call Restriction permission classification: 1 –...

  • Page 137: Operation Guide

    BG9008W User Manual Control. Enable Call Out Black&White. WEB configuration: Choose the menu: Voice Service→Advance Config→SIP Service Control. Add incoming blacklist. WEB configuration: Choose the menu: SIP Account→Account Parameter→Incoming Black&White List. Add outgoing blacklist. WEB configuration: Choose the menu: SIP Account→Account Parameter→OutGoing Black&White List.

  • Page 138: Call Time Limit

    BG9008W User Manual 5) A dial 110, successful. 4.21 Call Time Limit 4.21.1 Introduction Call Time Limit lets the call disconnect automatically when the call duration reached the specified time. 4.21.2 Configuration Parameters. WEB configuration: Choose the menu: SIP Account→Account Parameter→Supplementary ...

  • Page 139: Do Not Disturb

    BG9008W User Manual 4.23 Do Not Disturb 4.23.1 Introduction Do Not Disturb (DND) allows you to totally block incoming calls at any time. When activated, your phone no longer rings when callers attempt to reach you. Callers are presented with a message that you are busy.

  • Page 140: Operation Guide

    BG9008W User Manual 4.24.3 Operation Guide Extension A dial *52*8001#, 8001 is phone number of user B; A off-hook, special dial tone will be heard, B start ring after 5 seconds; B answer, A and B in conversation; A on-hook, end conversation;...

  • Page 141: Configuration

    BG9008W User Manual 4.26.2 Configuration Enable “Call Park” and “Call Park Pickup”. WEB configuration: Choose the menu: Voice Service→Advance Config→Supplementary Key. Set call park timeout ring back. WEB configuration: Choose the menu: Voice Service→Advance Config→SIP Service Control, Call Park Time-out.

  • Page 142: Configuration

    BG9008W User Manual 4.28.2 Configuration 1.Enable “Set Call Back on Busy” and “Cancel Call Back on Busy”. WEB configuration: Choose the menu: Voice Service→Advance Config→Supplementary 2.Extension enable Call Back On Busy WEB configuration: Choose the menu: SIP Account→Account Parameter→Supplementary, Call Back On Busy.
  • Page 143 BG9008W User Manual 4.30 Abbreviated Dialing 4.30.1 Introduction Abbreviated Dialing allows you to store selected phone numbers for quick and easy dialing. Each telephone number can be dialed by using a two-digit code with a simple prefix. Stored numbers may be up to 32 digits in length.
  • Page 144 BG9008W User Manual 5 CLI Introduction 5.1 Login The CLI interface is ready for accessing about one minute after the device powers on. The default LAN IP address is 192.168.100.1, you can access the CLI interface via either WAN port or LAN port. Enter telnet with IP address and then press ENTER, you can get access to the Login interface.
  • Page 145 BG9008W User Manual Input the command “set language” to set the CLI language: Figure 5-3 Set CLI Language 5.2 Network 5.2.1 3G Modem The command “show 3gmodem” show the 3G modem information as below: Figure 5-4 Show 3G Modem Information The command “set 3gmodem”...
  • Page 146 BG9008W User Manual Figure 5-5 Configure 3G Modem Parameters The following items are displayed on this screen: ► SP Network: Other or Swisscom. If it is not the target user, you need to select the other. ► Connect Mode: Manual or Auto. The default is Auto.
  • Page 147 BG9008W User Manual Figure 5-6 Show 3G Modem Status The following items are displayed on this screen: ► Device Status: Indicates whether to insert 3G module. ► SIM Card Status: Indicates whether to insert 3G modem in the SIM card, the ready state means the SIM card is detected.
  • Page 148 BG9008W User Manual Figure 5-9 Show Port Status Information The command “show port media-type” show the port media type information as below: Figure 5-10 Show Port Media Type Information The command “set port media-type” configure the port media type parameters as below.
  • Page 149 BG9008W User Manual 5.2.3 Wan Parameter 5.2.3.1 Show Wan Parameter The commad “show wan” show the WAN interface configuration as below: Figure 5-12 Show Wan Parameter The wan interfaces include DATA、VOICE、MGMT、OTHER1 and OTHER2. Input “1” to show DATA parameter as below: Figure 5-13 Show DATA Interface Parameter Input “2”...
  • Page 150 BG9008W User Manual Figure 5-14 Show VOICE Interface Parameter Input “3” to show MGMT parameter as below: Figure 5-15 Show MGMT Interface Parameter Input “4” to show OTHER1 parameter as below: Page 139 of 133...
  • Page 151 BG9008W User Manual Figure 5-16 Show OTHER1 Interface Parameter Input “5” to show OTHER2 parameter as below: Page 140 of 133...
  • Page 152 BG9008W User Manual Figure 5-17 Show OTHER2 Interface Parameter 5.2.3.2 Configure Wan Parameter The commad “set wan” configure the wan interface parameter as below: Figure 5-18 Configure WAN Parameter The wan interfaces include DATA、VOICE、MGMT、OTHER1 and OTHER2. Input “1” to configure DATA parameter as below:...
  • Page 153 BG9008W User Manual Figure 5-19 Configure DATA Interface Parameter The following items are displayed on this screen: Enable: Enable this WAN interface (DATA can’t be disabled). ► Type: Select PPPoE if your ISP provides xDSL Virtual Dial-up connection. ► VLAN Enable: Optional.

Table of Contents