Table of Contents
Advertisement
The following items are displayed on this screen:
Enable Access Control:
►
Policy:
►
Click the Index in the entry you want to modify. If you want to delete the entry, select it and click the Del.
Click the Add button to add a new entry.
The following items are displayed on this screen:
Action:
►
Enable Rule:
►
Description:
►
Source IP Range:
►
Destination IP Range:
►
Service Name:
►
Active Time:
►
Active Day:
►
3.4.4.3.2 User Authentication
This sub-page is used to control Internet access through username and password.
BG9008W User Manual
Figure 3-48 View Access Control Entry
Enable or disable access control from WAN.
Default policy of access control: Allow or Deny. If Allow is selected, all
packets will be allowed except the entries list on this page. If Deny is
selected, all packets will be denied except the entries list on this page.
Figure 3-49 Add or Modify Access Control Entry
The policy of this entry, Allow or Deny. It is the inverse of Policy. Read only.
Enable or disable this rule.
Enter a description string for this rule
Enter the source IP range in dotted-decimal format (e.g. 192.168.1.23).
Enter the destination IP range in dotted-decimal format (e.g. 192.168.1.23).
Choose a service type that defined in Service Type page.
Specify the time range for the entry to take effect.
Specify the day range for the entry to take effect.
Page 37 of 133
Advertisement
Table of Contents
