Table of Contents
Advertisement
The following items are displayed on this screen:
Enable PPTP Server:
►
IP Address Pool Range:
►
Enable Authentication:
►
Enable Encryption:
►
Click the Index in the entry you want to modify. If you want to delete the entry, select it and click the Del.
Click the Add button to add a new entry.
The following items are displayed on this screen:
Username:
Enter the account name of PPTP tunnel. It should be configured identically on server
►
and client.
Password:
Enter the password of PPTP tunnel. It should be configured identically on server and
►
client.
Binding IP:
Enter the IP address of the client which is allowed to connect to this PPTP server.
►
Description:
Enter the humane readable description for this account.
►
3.4.7.3
L2TP Server
Choose the menu Data Service→VPN→L2TP Server to load the following page.
BG9008W User Manual
Figure 3-74 Configure PPTP Server
Enable or disable the PPTP server function globally.
Specify the start and the end IP address for IP Pool. The start IP address
should not exceed the end address and the IP ranges must not overlap.
Specify whether to enable authentication for the tunnel.
Specify whether to enable the encryption for the tunnel. If enabled, the
PPTP tunnel will be encrypted by MPPE.
Figure 3-75 Add or Modify PPTP Client Entry
Page 53 of 133
Advertisement
Table of Contents
