Table of Contents
Advertisement
group, binding callee and matched caller.
Choose the menu SIP Trunk→Register IP Trunk→Registered IP Trunk to load the following page.
The following items are displayed on this screen:
►
Query:
Filtering out the specified accounts.
►
Register:
Click the Register button to start the registering to the SIP server.
►
Unregister:
Click the Unregister button to end the registering to the SIP server.
On click Add button to load following page.
The following items are displayed on this screen:
►
IP Trunk
Group:
►
Match Caller:
►
Binding
Callee:
►
IP Trunk
Name:
► Account:
►
Auth User
Name:
► Password:
►
Max Intercurrent
Count: The maximum of concurrent calls in the same time for the account.
►
Enable
Register:
►
Server
Description:
►Batch:
BG9008W User Manual
Figure 3-103 Registered IP Trunk List
Figure 3-104 Parameters of Registered IP Trunk
Each account is required to specify one SIP trunk group number which
will be used in the call routing.
When caller number match the number in whole or in part, then call out with
this IP trunk account.
When one incoming call arrives, the called number of all the account will be
matched and routed.
The description of IP Trunk.
The registering account provided by SS Platform.
The user name for SIP authentication. The user account will be used for
authentication if this parameter leave blank.
Authentication password.
Enable or disable registering.
Server IP or domain.
Increase in bulk registered IP trunk account, account name and authentication
Page 69 of 133
Advertisement
Table of Contents
