Table of Contents
Advertisement
The following items are displayed on this screen:
►Route
SN:
►Media
Transfer:
►Fax
Mode:
►Recording:
►Forbid Attendant
Transmit: Check the box to permit whether of not the attendant can transfer call to
►Security
Authentication: To prevent from attacking, only allow qualified SIP account to
►Seat Phone
name：
►Department
Name:
►Codec:
►DISA:
3.6.3.6
Incoming Black&White List
Blacklist & Whitelist is one function which detects incoming calls and rejects unwanted callers which
are in the blacklist and allows only whitelist numbers to come through.
If blacklist is enabled, you can only configure blacklist, otherwise, you can configure a whitelist. In
order to enable the blacklist or whitelist, choose the menu Voice Service→Advance Config→SIP
BG9008W User Manual
Figure 3-116 Advanced Parameters of Account
The system supports up to ten call route tables. The parameter is the
index of call routing table.
RTP media stream to go directly between the caller and the callee.
Transparent, T38, VBD.
Enable or disable call recording function for the user.
this user.
register.
The value is used for Caller ID Name Display.
Department attribution division, which is used in billing statistics.
Negotiation mode of voice capabilities.
Auto-Adapted: The system forwards codec capability priority.
Priority-Level: The system rearranges codec capability before sending.
Enable or disable DISA (Direct Inward System Access).
DISA Password: The password for authentication.
DISA Bind Caller Number: The caller from this number does not need to
authentication.
Page 77 of 133
Advertisement
Table of Contents
