Gaoke BG9008W User Manual page 43

The following items are displayed on this screen:
Max Nat Connections:
►
Enable MSS Auto Adaptive:
►
TCP MSS:
►
3.4.3.2 PAT Settings
Several internal addresses can be NATed to only one or a few external addresses by using a feature
called overload, which is also referred to as PAT. PAT is a subset of NAT functionality, where it maps
several internal addresses to a single external address. PAT statically uses unique port numbers on a
single outside IP address to distinguish between the various translations.
Choose the menu Data Service→NAT Config→PAT Settings to load the following page.
The following items are displayed on this screen:
Enable PAT: Enable or disable PAT globally.
►
Click the Index in the entry you want to modify. If you want to delete the entry, select it and click the Del.
Click the Add button to add a new entry.
BG9008W User Manual
Figure 3-39 Basic Settings
Specify the maximum number of NAT connections.
Enable or disable auto adaptive the value of MSS(Maximum Segment
Size).
If Enable MSS Auto Adaptive is not selected, configure this to specify
the maximum segment size of the TCP protocol.
Figure 3-40 View PAT Settings
Page 32 of 133