Table of Contents
Advertisement
The following items are displayed on this screen:
Protocol Type:
Custom protocol type, UDP or TCP.
►
Port Range:
Set port range.
►
3.4.5.4
Service
The device supports to remap scheduling priority and remark the value of DSCP or 802.1P according to
the service type.
Choose the menu Data Service→QoS→Service to load the following page.
The following items are displayed on this screen:
Name:
►
Remap Queue Priority:
►
Priority:
►
lowest
Remark 802.1p:
►
802.1p Value:
►
Remark DSCP:
►
DSCP Value:
►
3.4.5.5
ACL
Choose the menu Data Service→QoS→ACL to load the following page.
BG9008W User Manual
Figure 3-65 Configure Custom of Qos Flow Rate Limit
Figure 3-66 View Qos Service
Service name. Read only.
Check the box to remap scheduling queue.
There are four levels of priority. Priority 3 is highest, and priority 0 is the
Check the box to enable 802.1p priority remarking.
The value of remarking 802.1P.
Check the box to enable DSCP remarking.
The value of remarking DSCP.
Figure 3-67 View Qos ACL
Page 48 of 133
Advertisement
Table of Contents
