Elmo TD4114 IP II Instruction Manual page 84

G Motion Detection Setup (for ELMO 1Channel Viewer only)
Name
Use Motion Used to set whether to use motion detection.
Detection
Sensitivity Set the sensitivity of motion detection.
High – (adjustable using the scroll bar) – Low
Set/Clear Used to select Set or Clear.
Set: Sets the area dragged on the screen as a
detection area.
Clear: Sets the area dragged on the screen as a non-
detection area.
Detection Detect: Hatching display enabled
Area Not Detect: Hatching display disabled
Reset Sets all areas on the screen as non-detection areas.
Select All Sets all areas on the screen as detection areas.
Reverse Reverses set detection and non-detection areas.
Apply Applies area settings.
G Select Language (for ELMO 1Channel Viewer only)
Name
Select Japanese/English
Program
Language
G System Time Setup
Name
System Used to set the current date and time of the Camera.
Time
Function
Function
Function
- 83 -
Factory settings
No
High
Set
(None)
(None)
(None)
(None)
(None)
Factory settings
(None)
Factory settings
(None)