Mpeg4 Viewer Software [Elmo 1Channel Viewer]; Restrictions; Connection - Elmo TD4114 IP II Instruction Manual

[4] MPEG4 Viewer software [ELMO 1Channel Viewer]

(1) Restrictions

Access to the Camera through "ELMO 1Channel Viewer" (hereinafter referred to as
"Viewer") needs your computer to meet the following operating requirements:
• Microsoft Windows 2000 or XP.
• DirectX 9.0C or a later version is installed.
Note: The camera does not always ensure the proper operation of Viewer
in all environments.
Note: Depending on the settings of Windows, anti-virus software or any
other software, the connection to the Camera may not be
established, the image may not be displayed or some other troubles
may occur.
Therefore, when setting Windows, anti-virus software and any other
software, comply with the instructions in their manuals to ensure the
appropriate settings.
Note: In the factory setting, the Camera uses the ports of TCP: 80, 3490 –
3495 and UDP: 3000 – 4000.
When connecting the Camera to a router, a firewall unit or any other
unit, set the ports of these units appropriately.

(2) Connection

1. When running the Viewer program for the first time, Select Language window
appears to choose a language from "Japanese" or "English".
Note: The language can also be changed after running the Viewer
program.
- 47 -