Elmo TD4114 IP II Instruction Manual page 77

G Network
Consult the administrator of the network you intend to use before making network
settings.
Name
MPEG4 Select a MPEG4 distribution method.
Send Type UDP Unicast: A method of sending the UDP image
data by the connection request from the client.
Multicast: A method of sending the same UDP image
data to the multiple addresses in the same network.
TCP Unicast: A method of sending the TCP image
data by the connection request from the client.
IP address Set the IP address of the Camera.
Gateway Designate the IP address of a router when it is used to
connect the Camera to an external network.
DNS1 Set the address of a DNS server to which the Camera
is to be connected.
DNS2 Set the address of the DNS server to which the
Camera will be connected if it cannot connect to DNS1.
Subnet Set the subnet mask of the Camera.
mask
Broadcast Set the broadcast address of the Camera.
Start Port Designate the first of the ports the client uses.
Range
End Port Designate the last of the ports the client uses.
Range
HTTP Port Designate the port to be used for the Web server for
the Camera.
Option Port Designate the port to be used for distributing images
from the Camera
Multicast Designate the port to be used when the Camera is in
Port multicast mode.
Audio Port Designate the port to be used for transmitting and
receiving sound to/from the Camera.
Function
- 76 -
Factory settings
UDP
Unicast
192.168.1.
10
192.168.1.
1
0.0.0.0
0.0.0.0
255.255.
255.0
192.168.1.
255
3000
4000
80
3491
3490
3493