Jpeg Setup - Elmo TD4114 IP II Instruction Manual

• Framerate .............................. Designate the number of frames to be displayed per second
Note: When the frame rate is set to "1" or "5", sound can not be transmitted
or received by using "ELMO 1Channel Viewer".
• Resolution ............................. Designate the size of images to be displayed.
• Mode ..................................... Set a delay for images according to the network
Frame ................................. Reduces the delay for images.
GOP.................................... Enables the Camera to deal with a poor-performance

(8) JPEG Setup

Set image quality for JPEG images.
• JPEG Quality ........................ Designate image quality.
High.................................... High image quality. Although high-quality images can be
Normal ............................... Medium image quality with a compression rate between
Low .................................... Low image quality. The load on the transmission line
(setting range: 30, 15, 10, 5, and 1 frames/second).
D1: 704 × 480
SIF: 352 × 240
environment.
network environment to some extent although the delay for
image is long.
obtained, the load on the transmission line increases.
High and Low.
decreases.
- 31 -