User Setup - Elmo TD4114 IP II Instruction Manual

(13) User Setup

Make settings relating to user administration.
• Adding a new user
You can register a login ID, a password, and authority for connection to the Camera.
Designate an authority, enter a login ID and a password, and then click on the [Add]
button. The entered data will be displayed in the list.
The following three items can be registered.
• Administrator................... The administrator authority. The login ID is fixed to
• Operator ........................... You can view images and operate the Camera.
• User.................................. You can only view images.
* Only "root" can be registered for Administrator, and up to 99 names can be registered
for Operator and User combined. You can use up to 16 one-byte characters for a
name, including alphanumerical characters and upper-case and lower-case alphabetic
characters.
Note: Two-byte characters, including Japanese characters, are not
available for a login ID and pass word. Use one-byte alphanumerical
characters.
"root". With this ID, you can view images, operate the
Camera, and make settings.
- 39 -