Appendix E Compatibility - Agilent Technologies N6751A User Manual

NOTE
Pre-configured
Agilent MPS Model
N6721A
N6722A
N6723A
N6724A
N6725A
N6726A
N6727A
N6728A
N6729A
These Agilent MPS models are no longer orderable.
1
Series N6700 User's Guide
Appendix E
Compatibility
Differences – In General
Compatibility Command Summary
Differences in Earlier Agilent N6700A
The Agilent N6700 MPS is programmatically compatible with the
Agilent 6621A − 6629A DC power supplies. This means that you can
program the power system using the same commands that are used
to program the Agilent 662xA power supplies. The following table
describes the model mapping.
In addition to the pre-configured models shown below, Agilent 662xA
commands will also work in mainframes that contain any
combination of Agilent N675xA or N676xA power modules.
Agilent 662xA commands will NOT work in mainframes that contain any Agilent
of N673xA/B or N674xA/B power modules. This is true even if the mainframes
also contain Agilent N675xA or N676xA power modules.
Description
1
N6700A mainframe with 2 - N6752A autoranging modules
N6700A mainframe with 2 - N6752A autoranging modules
N6700A mainframe with 2- N6751A and 1- N6752A
autoranging module
N6700A mainframe with 4 - N6751A autoranging modules
N6700A mainframe with 1 - N6761A and 1 - N6762A
precision module
N6700A mainframe with 2 - N6761A and 2 - N6762A
precision modules
N6700A mainframe with 4 - N6751A autoranging modules
N6700A mainframe with 2 - N6762A precision modules
N6700A mainframe with 4 - N6762A precision modules
This appendix also contains a section describing how the earlier
Agilent N6700A mainframes are different from the Agilent N6700B
mainframes, which are the primary focus of this manual.
................................................................................192
...............................................................193
Mainframes..................................197
Previous Agilent
Model
6621A
6622A
6623A
6624A
6625A
6626A
6627A
6628A
6629A
191