Agilent Technologies N6751A User Manual page 124

Appendix A Specifications
Programming Ranges:
Voltage
Current
Programming Resolution:
Voltage
Current
Measurement Resolution:
Voltage
Current
Output Ripple and Noise (PARD):
CC rms
Common Mode Noise:
(from from either output to chassis)
20 Hz – 20 MHz;
Rms
peak-to-peak
Over-voltage Protection:
Accuracy
Maximum setting
Response time
Maximum Up-programming and Down-programming Time with full resistive load:
(time f
rom 10% to 90% of total voltage excursion)
Voltage setting from 0 V to
full scale and full scale to 0V
Maximum Up-programming and Down-programming Settling Time with full resistive load:
(time from start of voltage change until voltage settles within 0.1% of the full-scale voltage of its final value)
Voltage setting from 0 V to
full scale and full scale to 0V
Remote Sense Capability:
Series and Parallel Operation:
124
Agilent Models N6731A - N6735A and N6742A - N6745A
N6731A N6732A/N6742A
20 mV – 5.1 V 20 mV – 8 .16 V
10 mA – 10.2 A 10 mA – 6.375 A/
10 mA – 10.2 A
3.5 mV 4 mV
5 mA 3.25 mA
3 mV 4 mV
10 mA 7 mA
8 mA 4 mA
1 mA 1 mA
< 10 mA < 10 mA
0.25% + 250 mV 0.25% + 250 mV
7 V 10 V
50 µs from occurrence of over-voltage condition to start of output shutdown
10 ms 10 ms
100 ms 100 ms
Outputs can maintain specifications with up to a 1-volt drop per load lead.
Identically rated outputs can be operated directly in parallel or can be connected for straight series
operation. Auto-series and auto-parallel operation is not available.
N6733A/N6743A N6734A/N6744A
20 mV – 20.4 V 20 mV – 35.7 V
10 mA – 2.55 A/ 10 mA – 1.53 A/
10 mA – 5.1 A 10 mA – 3.06 A
5 mV
3.25 mA 3.25 mA
10 mV
3 mA
2 mA
1 mA
< 10 mA < 10 mA
0.25% + 250 mV 0.25% + 250 mV
22 V
10 ms
100 ms 100 ms
Series N6700 User's Guide
N6735A/N6745A
20 mV – 51 V
10 mA – 0.816 A/
10 mA – 1.63 A
9 mV 13 mV
3.25 mA
18 mV 30 mV
2 mA 1 mA
2 mA 2 mA
1 mA 1 mA
< 10 mA
0.25% + 300 mV
38.5 V 55 V
10 ms 10 ms
100 ms