Agilent Technologies N6751A User Manual page 188

Appendix D Service
−108
−109
−110
−111
−112
−113
−114
−120
−121
−123
−124
−128
−130
−131
−134
−138
−140
−141
−144
−148
−150
−151
−158
188
Command Errors (continued)
Parameter not allowed
More parameters were received than were expected.
Missing parameter
Fewer parameters were received than were expected.
Command header error
An error was detected in the header.
Header separator error
A character that was not a valid header separator was found in the command string.
Program mnemonic too long
The header contains more than 12 characters.
Undefined header
A command was received that was not valid for this instrument.
Header suffix out of range
The value of the numeric suffix is not valid.
Numeric data error
Generic numeric data error.
Invalid character in number
An invalid character for the data type was found in the command string.
Exponent too large
The magnitude of the exponent was larger than 32000.
Too many digits
The mantissa of a numeric parameter contained more than 255 digits, excluding leading zeros.
Numeric data not allowed
A numeric parameter was received but a character string was expected.
Suffix error
Generic suffix error
Invalid suffix
A suffix was incorrectly specified for a numeric parameter.
Suffix too long
The suffix contains more than 12 characters.
Suffix not allowed
A suffix is not supported for this command.
Character data error
Generic character data error
Invalid character data
Either the character data element contains an invalid character, or the element is not valid.
Character data too long
The character data element contains more than 12 characters.
Character data not allowed
A discrete parameter was received, but a string or numeric parameter was expected.
String data error
Generic string data error
Invalid string data
An invalid character string was received. Check that the string is enclosed in quotation marks.
String data not allowed
A character string was received, but is not allowed for this command.
Series N6700 User's Guide