Agilent Technologies N6751A User Manual page 126

Appendix A Specifications
Command Processing Time:
From receipt of command to start of the
output change
Protection Response Characteristics:
INH input
Fault on coupled outputs
Digital Control Characteristics:
Maximum voltage ratings
Pins 1 and 2 as FLT output
Pins 1 - 7 as digital/trigger outputs
(pin 8 = common)
Pins 1 - 7 as digital/trigger inputs and
pin 3 as INH input
(pin 8 = common)
Interface Capabilities:
GPIB:
USB 2.0:
10/100 LAN:
Built-in Web server
Environmental Conditions
Operating environment
Temperature range
Relative humidity
Altitude
Storage temperature
LED statement
1
Agilent N6700A mainframes have only 4 digital control pins. Refer to Appendix D for pin assignments.
126
Agilent N6700A/B MPS Mainframe
≤ 1 ms
5 µs from receipt of inhibit to start of shutdown
< 10 µs from receipt of fault to start of shutdown
NOTE 1
+16.5 VDC/− 5 VDC between pins (pin 8 is internally connected to chassis ground).
Maximum low-level output voltage = 0.5 V @ 4 mA
Maximum low-level sink current = 4 mA
Typical high-level leakage current = 0.14 mA @ 16.5 VDC
Maximum low-level output voltage = 0.5 V @ 4 mA; 1 V @ 50 mA; 1.75 V @ 100 mA
Maximum low-level sink current = 100 mA
Typical high-level leakage current = 0.12 mA @ 16.5 VDC
Maximum low-level input voltage = 0.8 V
Minimum high-level input voltage = 2 V
Typical low-level current = 2 mA @ 0 V (internal 2.2k pull-up)
Typical high-level leakage current = 0.12 mA @ 16.5 VDC
SCPI - 1993, IEEE 488.2 compliant interface
Requires Agilent IO Library version M.01.01 and up, or 14.0 and up
Requires Agilent IO Library version L.01.01 and up, or 14.0 and up
Requires Internet Explorer 5+ or Netscape 6.2+
Indoor use, installation category II (for AC input), pollution degree 2
0°C to 55°C (current is derated 1% per °C above 40°C ambient temperature)
Up to 95%
Up to 2000 meters
-30°C to 70°C
Any LEDs used in this product are Class 1 LEDs as per IEC 825-1
N6700A/B
Series N6700 User's Guide