Hermle UWF 902 H Operating Manual page 82

4.3.5 Operation - Universal Clamping Table
Further equipment for the universal clamping
table:
SK 40 holder
The universal clamping table has a SK 40 holder in
its centre which can be used after removal of the
table.
The SK-40 shafts can be clamped with the hand
crank [6] via the fixing device [10] for the SK 40 holder
(tips for arbor holder, draw chuck, clamping piers,
mandrels etc.).
Attachment of the vertical arbor holder:
• Remove the table plate.
• Tighten the arbor holder with two holding bolts M12
to the support plate of the universal clamping table.
The functions of the table will be completely kept.
4-20