Hermle UWF 902 H Operating Manual page 25

2-6
2.3 Installation Instructions
Fixing Blocks
We recommend the use of anchorable fixing blocks
if the machine is to be firmly anchored to the
machine park floor.
Each fixing block is screwed tightly to the machine
park floor using two stone-bolts.
If the floor is suitable, the fixing blocks can also be
fastened by means of heavy-duty plugs or anchor
bolts (e.g. Fischer No. 51351)
The schematic illustration (above) shows a cross-
section of a fixing block anchored to the floor with
stone-bolts.
The distance from the upper edge of the machine
foot to the machine-park floor must be at least 183
mm so that the cooling lubricant tank can later be
pushed safely under the protective enclosure.