Hermle UWF 902 H Operating Manual page 102

5. Maintenance and Lubrication
5.1 General
Milling machines are subject to numerous loads
and they require regular care in order to retain their
accuracy and operational capabilities.
In order that your UWF remains ready for service
over many years, please observe the following
general rules:
• Only use the lubricants recommended by us.
• Do not change any components that work
faultlessly.
• Never change a setting, and do not extend,
rearrange, or reconstruct any machine parts.
• Comply with the specified maintenance intervals
according either to actual machine use or to set
time periods. (See following pages)
• Distinguish between repair and maintenance.
Our service department is at your service in case
of technical faults. Possible causes of faults and
measures to deal with them are detailed in the
tables in section 6.
The phone numbers of the HERMLE Service
Department can be found in the pocket on the
reverse side of the front cover.
5. Maintenance and Lubrication / 5.1 General
5-1