Caution!
Before removing the feed motor or
the toothed belt secure the cross
slide rest!
Pay attention to the operating
manual !
5.18
Removal of the Feed Motor
(Z-Axis)
When doing repair work at the feed motor and/or at the
toothed belt (Z-axis) absolutely secure the cross slide
rest against falling down.
• Move the cross slide rest upwards as far as possible
so that the two screw threads M 12 beneath the
cross slide rest become visible.
• Screw the two hexagon socket screws M12 into the
provided screw thread [1] at the machine column
and let the cross slide rest slowly slide downwards.
• The cross slide rest is now secured against falling
down.
Note
No movements until the screws in the machine column
have been removed.
Caution danger of collision!
5.18 Removal Feed Motor (Z-Axis)
1
5-25