Consumables And Replacement Cycle - Fujitsu FI-4860C2 Operator's Manual

4.1 Consumables and Replacement
Cycle
The following table lists the Part No. and the standard replacement cycle of the consumables. It is
recommended that you stock extra consumables before the ones in the scanner reach the end of
Their service life. The consumables must be replaced periodically. You can check the number of
scanned pages for the Pad ASSY, the Pick roller unit, the Brake roller unit, and Print cartridge,
and you can check the cumulative lamp-on time for the Lamps by referring to each counter on this
scanner.
Descriptions
Lamp
Pad ASSY
Pick Roller Unit
Brake Roller Unit
Print Cartridge
The replacement cycle is based on the printing on Letter/A4 woodfree paper or wood containing
paper documents (21lb [80 g/m
density or paper type.
For the purchase of the consumables, please contact the FUJITSU scanner dealer where you
purchased your scanner.
ATTENTION
4-2

4.1 Consumables and Replacement Cycle

Part No.
PA83950-0290
CA04315-G730
PA03296-F711
CA04315-F705
CA00050-0262
2
]). The replacement cycle may differ due to paper quality, print
Use the correct Print cartridge. The Scanner may be damaged if the wrong
Print cartridge is installed.
Standard replacement cycle
1,000 Hours(60,000minutes)
300,000 sheets or 1 year
300,000 sheets or 1 year
300,000 sheets or 1 year
Black ink cartridge
4,000,000 characters