Fujitsu FI-4860C2 Operator's Manual page 95

6. When [Hopper Empty] is displayed, press
7. Place the same cleaning sheet on the hopper table with adhesive side up
by aligning the right side with the hopper guide. Press
then the cleaning sheet is fed.
8. When "Hopper Empty" is displayed, press
9. Remove the protective paper from a new cleaning sheet and place it with
the adhesive side face down on the hopper table, aligning the left side
with the hopper guide. Press
is fed.
Repeat steps 6 through 8. When the cleaning is completed turn off the power.
(Stop button).
(Stop button).
(Start button), then the cleaning sheet
3.3 Cleaning the Rollers
(Start button),
3-9
3