Setup Mode Functions - Fujitsu FI-4860C2 Operator's Manual

7.2 Setup mode functions

There are 32 items in setup mode as shown in the following.
LCD Descriptions
display
Double Feed Specifies the double-feed
(Multi-feed) detection mode
(Multi-feed)
based on:
1: Document overlapping /
thickness
2: Document overlapping /
thickness+ Brake roller
rotation amount
Length Check Specifies the double-feed
detection based on the
document length deviation.
There are 3 selections for the
acceptable length deviation
tolerance as shown right.
IPC The scan parameters are set
with recommended values
Pre-Set
automatically. There are 5
choices as shown right.
Selectable Default
parameters
No/Yes Yes
1: Overlapping /
Thickness
2: Overlapping /
Thickess+ Brake
roller
No/Yes No
Yes:
10/15/20mm
(0.4/ 0.6/ 0.8 in.)
(Tolerance)
No No
1:
2:
3:
4:
5:

7.2 Setup mode functions

Mode Remarks
On- Off-
line line
Avail- Avail- Settings via the
able able PC have the
priority.
Avail- Avail- Settings via the
able able PC have the
priority.
Avail- Avail-
able able
7
7-9