Fujitsu FI-4860C2 Operator's Manual page 232

3) At <Screen8-1>, press
select consumable error process.
(1) [Stop] is blinking:
(2) [Message] is blinking: When the consumables replacement limit is
By pressing
4) At <Screen8-2>, specify the number of scans to get Consumables replacement
message.
Each time
10,000.
Each time
10,000.
5) Press (Enter button) to confirm the setting.
Press (Exit button) , and the LCD display goes back to [Ready] screen.
7-32
7.3 Setup Mode Details
(Left arrow button) or
When the consumables replacement limit is
reached, the Consumables replacement mes-
sage (Abrasion alarm) is shown on the LCD and
scanning stops.
reached, the Consumables replacement mes-
sage (Abrasion alarm) is shown on the LCD but
the scanning continues.
(Enter button), <Screen8-2> appears on the LCD.
<Screen8-2>
! 0 8 -
= 3
(Left arrow button) is pressed, the counter value decrements by
(Right arrow button) is pressed, the counter value increments by
(Right arrow button) to
2 A l a r m
0 0 0 0 0 s
C N T
h e e t