Fujitsu FI-4860C2 Operator's Manual page 264

31. Setting Auto crop width
When the scanner is set to scan in the Black & White mode and to detect a paper size
automatically, the width of the detected paper may not be the integer number. You can
round the number including fractions up or down.
1) Press (Next button) or
<Screen31>.
2) At <Screen31>, press
select [round up] or [round down] .
Select "Round Up" if you want to prevent the output image from chipping, and
select 'Round Down" if you want to delete unnecessary details.
3) Press
By pressing
7-64
7.3 Setup Mode Details
(Previous button) and let LCD display
<Screen31>
! 3 1
3
(Left arrow button) or
(Enter button) to determine the settings done.
(Exit button), LCD display goes back to "Ready".
A u t o c
o
2 b r u n
(Right arrow button) to
r o p W .
d u p