Fujitsu FI-4860C2 Operator's Manual page 277

5) Specify the scanning conditions.
(1)At <Screen51-2>, select the left most item, [S] in the sample screen, and
press (Enter button). Then the LCD display shows <Screen51-
2.1>.
At this screen, press
and select simplex or duplex.
Press (Enter button) and confirm the setting.
Then the display goes back to <Screen51-2>.
(2) At <Screen51-2>, select the second item from left, [A4P] in the sample
screen, and press
<Screen51-2.2>.
At this screen, press
and select the document size and the orientation. Following parameters
can be specified.
<Screen51-2.1>
S I M P L E
S I
(Left arrow button) or
(Enter button). Then the LCD display shows
<Screen51-2.2>
P A P
(Left arrow button) or
/ D U P
X
M P L E X
(Right arrow button)
E R S I Z E
A 4 P
(Right arrow button)
7.5 Test Mode Details
L E X
7
7-77