Fujitsu FI-4860C2 Operator's Manual page 226

3) In case of (2) or (3), by pressing
<Screen5-1>.
4) At <Screen5-1>, by pressing
the document length can be specified.
By pressing
By pressing
(1) [10] is blinking: The document length difference below 10mm is not
(2) [15] is blinking: The document length difference below 15mm is not
(3) [20] is blinking: The document length difference below 20mm is not
5) Press (Enter button) to confirm the setting.
Press (Exit button), and the LCD display goes back to [Ready] screen.
7-26
7.3 Setup Mode Details
<Screen5-1>
! 0 5 -
= 0
1
(Left arrow button) or
(Right arrow button), selection moves from (1) to (3).
(Left arrow button), selection moves from (3) to (1).
detected as an error.
detected as an error.
detected as an error.
(Enter button), LCD display changes to
1 L e n g t
/ 2 0
/ 1 5
(Right arrow button),
h
m m