Neptune E4000 Operator's Manual

Operators Guide for E4000 with no Flow Valve Control,

How to make a delivery

1. Insert ticket in the printer
2. From the "
NEPTUNE
four button front control panel, until "
START/ENTER
ROUTE
3. Press or
DELIVERY
Press or
4.
" menu, then press the
PRODUCT
For a priced product the display will show the gross price, confirm this is the correct
price by pressing the
"SELECT PRODUCT" menu).
SELECT PRODUCT
GROSS PRICE
5. The display will reset, and then you can open the manual valve to begin the delivery.
NET/TOT
NET 60 F
6. When the delivery is complete, close the manual valve.
("NONE" BATCH mode)
" root menu, press either of the white buttons
button.
NEPTUNE
SUPERVISOR
until " " is flashing, then press the
DELIVERY
VOL
until the product that you intend to deliver is displaying in the "
START/ENTER
START/ENTER
FUEL #1
$/VOL
__ $/ GAL
$/VOL
0.0 GAL
" is flashing. Then press the green
ROUTE
W&M
START/ENTER
REPORTS
button to confirm the correct product.
button (
or press STOP/CANCEL to return to the
QSG-303-5
Rev. B 1/05
or on the
button.
SELECT